Email Us Today: 
Call Us Toll Free: 
- Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.
- Tabulated values were determined from the formula for maximum H
- No tolerance for gaging diameter is given. If the gaging diameter of the gage used differs from the tabulated value, the protrusion will be affected accordingly, and the proper protrusion values shall be recalculated using the formulas shown in Appendix.
Unit of Measure
Specifications
Product |
N/A Slotted Cap Screws |
Unit of Measure |
N/A English |
Nominal Size or Basic Screw Dia. |
N/A 1-1/2 in |
Nominal Size or Basic Screw Dia. (Decimal) |
N/A 1.5000 in |
Max. Body Dia. (E) |
N/A 1.5000 in |
Min. Body Dia. (E) |
N/A 1.4880 in |
Max. Edge Sharp Head Dia. (A) |
N/A 2.812 in |
Min. Edge Rounded or Flat Head Dia. (A) |
N/A 2.570 in |
Ref. Head Height (H) |
N/A 0.742 in |
Max. Slot Width (J) |
N/A 0.258 in |
Min. Slot Width (J) |
N/A 0.240 in |
Max. Slot Depth (T) |
N/A 0.360 in |
Min. Slot Depth (T) |
N/A 0.244 in |
Max. Fillet Radius (U) |
N/A 0.600 in |
Max. Protrusion Above Gaging Dia. (F) |
N/A 0.183 in |
Min. Protrusion Above Gaging Dia. (F) |
N/A 0.124 in |
Gaging Dia. (G) |
N/A 2.505 in |
