Email Us Today: 
Call Us Toll Free: 
Slotted Cap Screws
slotted-cap-screws
Slotted Flat Countersunk Head Cap Screws
(14)- Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.
- Tabulated values were determined from the formula for maximum H
- No tolerance for gaging diameter is given. If the gaging diameter of the gage used differs from the tabulated value, the protrusion will be affected accordingly, and the proper protrusion values shall be recalculated using the formulas shown in Appendix.
Slotted Round Head Cap Screws
(8)- Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.
- Formulas for head dimensions are given in Appendix.
Slotted Fillister Head Cap Screws
(10)- A light rounding of the edges at the periphery of the head shall be permissible provided the diameter of the bearing circle is equal to no less than 90 percent of the specified minimum head diameter.
- Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.
- Formulas for head dimensions are given in Appendix.
