Email Us Today: 
Call Us Toll Free: 
- Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.
- Tabulated values were determined from the formula for maximum H
- No tolerance for gaging diameter is given. If the gaging diameter of the gage used differs from the tabulated value, the protrusion will be affected accordingly, and the proper protrusion values shall be recalculated using the formulas shown in Appendix.
Unit of Measure
Specifications
Product |
N/A Slotted Cap Screws |
Unit of Measure |
N/A English |
Nominal Size or Basic Screw Dia. |
N/A 1-1/4 in |
Nominal Size or Basic Screw Dia. (Decimal) |
N/A 1.2500 in |
Max. Body Dia. (E) |
N/A 1.2500 in |
Min. Body Dia. (E) |
N/A 1.2390 in |
Max. Edge Sharp Head Dia. (A) |
N/A 2.312 in |
Min. Edge Rounded or Flat Head Dia. (A) |
N/A 2.110 in |
Ref. Head Height (H) |
N/A 0.600 in |
Max. Slot Width (J) |
N/A 0.211 in |
Min. Slot Width (J) |
N/A 0.193 in |
Max. Slot Depth (T) |
N/A 0.291 in |
Min. Slot Depth (T) |
N/A 0.197 in |
Max. Fillet Radius (U) |
N/A 0.500 in |
Max. Protrusion Above Gaging Dia. (F) |
N/A 0.155 in |
Min. Protrusion Above Gaging Dia. (F) |
N/A 0.105 in |
Gaging Dia. (G) |
N/A 2.052 in |
