Email Us Today: 
Call Us Toll Free: 
- Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.
- Tabulated values were determined from the formula for maximum H
- No tolerance for gaging diameter is given. If the gaging diameter of the gage used differs from the tabulated value, the protrusion will be affected accordingly, and the proper protrusion values shall be recalculated using the formulas shown in Appendix.
Unit of Measure
Specifications
Product |
N/A Slotted Cap Screws |
Unit of Measure |
N/A English |
Nominal Size or Basic Screw Dia. |
N/A 1-1/8 in |
Nominal Size or Basic Screw Dia. (Decimal) |
N/A 1.1250 in |
Max. Body Dia. (E) |
N/A 1.1250 in |
Min. Body Dia. (E) |
N/A 1.1140 in |
Max. Edge Sharp Head Dia. (A) |
N/A 2.062 in |
Min. Edge Rounded or Flat Head Dia. (A) |
N/A 1.880 in |
Ref. Head Height (H) |
N/A 0.529 in |
Max. Slot Width (J) |
N/A 0.196 in |
Min. Slot Width (J) |
N/A 0.178 in |
Max. Slot Depth (T) |
N/A 0.257 in |
Min. Slot Depth (T) |
N/A 0.173 in |
Max. Fillet Radius (U) |
N/A 0.450 in |
Max. Protrusion Above Gaging Dia. (F) |
N/A 0.141 in |
Min. Protrusion Above Gaging Dia. (F) |
N/A 0.096 in |
Gaging Dia. (G) |
N/A 1.826 in |
