Email Us Today: 
Call Us Toll Free: 
- Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.
- Tabulated values were determined from the formula for maximum H
- No tolerance for gaging diameter is given. If the gaging diameter of the gage used differs from the tabulated value, the protrusion will be affected accordingly, and the proper protrusion values shall be recalculated using the formulas shown in Appendix.
Unit of Measure
Specifications
Product |
N/A Slotted Cap Screws |
Unit of Measure |
N/A English |
Nominal Size or Basic Screw Dia. |
N/A 1 in |
Nominal Size or Basic Screw Dia. (Decimal) |
N/A 1.0000 in |
Max. Body Dia. (E) |
N/A 1.0000 in |
Min. Body Dia. (E) |
N/A 0.9900 in |
Max. Edge Sharp Head Dia. (A) |
N/A 1.875 in |
Min. Edge Rounded or Flat Head Dia. (A) |
N/A 1.711 in |
Ref. Head Height (H) |
N/A 0.494 in |
Max. Slot Width (J) |
N/A 0.188 in |
Min. Slot Width (J) |
N/A 0.166 in |
Max. Slot Depth (T) |
N/A 0.240 in |
Min. Slot Depth (T) |
N/A 0.162 in |
Max. Fillet Radius (U) |
N/A 0.400 in |
Max. Protrusion Above Gaging Dia. (F) |
N/A 0.127 in |
Min. Protrusion Above Gaging Dia. (F) |
N/A 0.087 in |
Gaging Dia. (G) |
N/A 1.661 in |
