Email Us Today: 
Call Us Toll Free: 
- Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.
- Tabulated values were determined from the formula for maximum H
- No tolerance for gaging diameter is given. If the gaging diameter of the gage used differs from the tabulated value, the protrusion will be affected accordingly, and the proper protrusion values shall be recalculated using the formulas shown in Appendix.
Unit of Measure
Specifications
Product |
N/A Slotted Cap Screws |
Unit of Measure |
N/A English |
Nominal Size or Basic Screw Dia. |
N/A 7/8 in |
Nominal Size or Basic Screw Dia. (Decimal) |
N/A 0.8750 in |
Max. Body Dia. (E) |
N/A 0.8750 in |
Min. Body Dia. (E) |
N/A 0.8660 in |
Max. Edge Sharp Head Dia. (A) |
N/A 1.625 in |
Min. Edge Rounded or Flat Head Dia. (A) |
N/A 1.480 in |
Ref. Head Height (H) |
N/A 0.423 in |
Max. Slot Width (J) |
N/A 0.167 in |
Min. Slot Width (J) |
N/A 0.147 in |
Max. Slot Depth (T) |
N/A 0.206 in |
Min. Slot Depth (T) |
N/A 0.138 in |
Max. Fillet Radius (U) |
N/A 0.350 in |
Max. Protrusion Above Gaging Dia. (F) |
N/A 0.113 in |
Min. Protrusion Above Gaging Dia. (F) |
N/A 0.077 in |
Gaging Dia. (G) |
N/A 1.435 in |
