Email Us Today: 
Call Us Toll Free: 
- Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.
- Tabulated values were determined from the formula for maximum H
- No tolerance for gaging diameter is given. If the gaging diameter of the gage used differs from the tabulated value, the protrusion will be affected accordingly, and the proper protrusion values shall be recalculated using the formulas shown in Appendix.
Unit of Measure
Specifications
Product |
N/A Slotted Cap Screws |
Unit of Measure |
N/A English |
Nominal Size or Basic Screw Dia. |
N/A 3/8 in |
Nominal Size or Basic Screw Dia. (Decimal) |
N/A 0.3750 in |
Max. Body Dia. (E) |
N/A 0.3750 in |
Min. Body Dia. (E) |
N/A 0.3690 in |
Max. Edge Sharp Head Dia. (A) |
N/A 0.750 in |
Min. Edge Rounded or Flat Head Dia. (A) |
N/A 0.682 in |
Ref. Head Height (H) |
N/A 0.210 in |
Max. Slot Width (J) |
N/A 0.094 in |
Min. Slot Width (J) |
N/A 0.081 in |
Max. Slot Depth (T) |
N/A 0.103 in |
Min. Slot Depth (T) |
N/A 0.068 in |
Max. Fillet Radius (U) |
N/A 0.150 in |
Max. Protrusion Above Gaging Dia. (F) |
N/A 0.060 in |
Min. Protrusion Above Gaging Dia. (F) |
N/A 0.040 in |
Gaging Dia. (G) |
N/A 0.651 in |
