Email Us Today: 
Call Us Toll Free: 
- Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.
- Tabulated values were determined from the formula for maximum H
- No tolerance for gaging diameter is given. If the gaging diameter of the gage used differs from the tabulated value, the protrusion will be affected accordingly, and the proper protrusion values shall be recalculated using the formulas shown in Appendix.
Unit of Measure
Specifications
Product |
N/A Slotted Cap Screws |
Unit of Measure |
N/A English |
Nominal Size or Basic Screw Dia. |
N/A 5/16 in |
Nominal Size or Basic Screw Dia. (Decimal) |
N/A 0.3125 in |
Max. Body Dia. (E) |
N/A 0.3125 in |
Min. Body Dia. (E) |
N/A 0.3070 in |
Max. Edge Sharp Head Dia. (A) |
N/A 0.625 in |
Min. Edge Rounded or Flat Head Dia. (A) |
N/A 0.567 in |
Ref. Head Height (H) |
N/A 0.177 in |
Max. Slot Width (J) |
N/A 0.084 in |
Min. Slot Width (J) |
N/A 0.072 in |
Max. Slot Depth (T) |
N/A 0.086 in |
Min. Slot Depth (T) |
N/A 0.057 in |
Max. Fillet Radius (U) |
N/A 0.125 in |
Max. Protrusion Above Gaging Dia. (F) |
N/A 0.053 in |
Min. Protrusion Above Gaging Dia. (F) |
N/A 0.035 in |
Gaging Dia. (G) |
N/A 0.538 in |
