Email Us Today: 
Call Us Toll Free: 
- Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
- Flat on minimum diameter head calculated on minimum sharp and absolute minimum head diameters and 82 deg head angle.
- Head shall be unslotted, unless otherwise specified. Slot dimensions are same as Slotted Flat Countersunk Head Cap Screws in American National Standard, ASME B18.6.2.
- Maximum head height calculated on maximum sharp head diameter, basic bolt diameter and 78 deg head angle.
- Minimum head height calculated on minimum sharp head diameter, basic bolt diameter and 82 deg head angle.
Unit of Measure
Specifications
Product |
N/A Round Head Bolts |
Unit of Measure |
N/A English |
Nominal Size or Basic Bolt Dia. |
N/A 1-1/8 in |
Nominal Size or Basic Bolt Dia. (Decimal) |
N/A 1.1250 in |
Max. Body Dia. (E) |
N/A 1.149 in |
Min. Body Dia. (E) |
N/A 1.098 in |
Max. Edge Sharp Head Dia. (A) |
N/A 2.104 in |
Min. Edge Sharp Head Dia. (A) |
N/A 2.037 in |
Absolute Min. Edge Rounded or Flat Head Dia. (A) |
N/A 1.962 in |
Max. Flat on Min. Dia. Head (F) |
N/A 0.043 in |
Max. Head Height (H) |
N/A 0.604 in |
Min. Head Height (H) |
N/A 0.525 in |
Max. Slot Width (J) |
N/A 0.196 in |
Min. Slot Width (J) |
N/A 0.178 in |
Max. Slot Depth (T) |
N/A 0.257 in |
Min. Slot Depth (T) |
N/A 0.173 in |
