Print Back
  • Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
  • Flat on minimum diameter head calculated on minimum sharp and absolute minimum head diameters and 82 deg head angle.
  • Head shall be unslotted, unless otherwise specified. Slot dimensions are same as Slotted Flat Countersunk Head Cap Screws in American National Standard, ASME B18.6.2.
  • Maximum head height calculated on maximum sharp head diameter, basic bolt diameter and 78 deg head
more
Unit of Measure

Manufacturer

Manufacturer

Industrial Fasteners Institute

Specifications

Product

Round Head Bolts

Unit of Measure

English

Nominal Size or Basic Bolt Dia.

1-1/8 in

Nominal Size or Basic Bolt Dia. (Decimal)

1.1250 in

Max. Body Dia. (E)

1.149 in

Min. Body Dia. (E)

1.098 in

Max. Edge Sharp Head Dia. (A)

2.104 in

Min. Edge Sharp Head Dia. (A)

2.037 in

Absolute Min. Edge Rounded or Flat Head Dia. (A)

1.962 in

Max. Flat on Min. Dia. Head (F)

0.043 in

Max. Head Height (H)

0.604 in

Min. Head Height (H)

0.525 in

Max. Slot Width (J)

0.196 in

Min. Slot Width (J)

0.178 in

Max. Slot Depth (T)

0.257 in

Min. Slot Depth (T)

0.173 in

Codes and Standards

Codes and Standards

ASME B18.5 1990 (R1998)