EmailEmail Us Today: info@salessystemsltd.comPhoneCall Us Toll Free: 800.368.3711
Sales Systems Limited Products and Services > Fasteners > Bolts / Screws > Tapping Screws > Cross Recessed Flat Countersunk Trim Head Tapping Screws > View Items  
Download PDF Download PDF         Email Email This Page     Save To Favorites Save To Favorites

Cross Recessed Flat Countersunk Trim Head Tapping Screws

Check up to five results to perform an action.

  • Applicable to screw types as indicated by code symbols.
    Type AB thread forming.
    Type A thread forming, except for short lengths.
    Types B and BP thread forming; and Types BF and BT thread cutting
    Type C thread forming; and Types D, F, G, and T thread cutting.
  • Short screws are those threaded full length.
  • Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
  • Maximum diameter shall not exceed minimum plus 0.011" for Type A screws, and basic screw diameter for all other screw types.
  • Tabulated values determined from formula for H max, Appendix.
  • No tolerance for gaging diameter is given. If the gaging diameter of the gage used differs from tabulated value, the protrusion will be affected accordingly and the proper protrusion values must be recalculated using the formulas shown in Appendix.
Note: Flat countersunk trim head tapping screws are furnished in cross recessed heads only.




Compare Items
   
  Results 1 - 16 of 16 1 

Item #

Description

Nominal Size or Basic Screw Dia.

Head Size

Min. E (Type A)

Max. (A)

Ref. (H)

Max. (F)

item-2791 Cross Recessed Flat Countersunk Trim Head Tapping Screw, with 0.187" Head Dia. No. 4 3 0.105 in 0.187 in 0.052 in 0.031 in
item-2792 Cross Recessed Flat Countersunk Trim Head Tapping Screw, with 0.212" Head Dia. No. 5 4 0.118 in 0.212 in 0.060 in 0.032 in
item-2793 Cross Recessed Flat Countersunk Trim Head Tapping Screw, with 0.212" Head Dia. No. 6 4 0.131 in 0.212 in 0.052 in 0.032 in
item-2794 Cross Recessed Flat Countersunk Trim Head Tapping Screw, with 0.237" Head Dia. No. 6 5 0.131 in 0.237 in 0.068 in 0.034 in
item-2795 Cross Recessed Flat Countersunk Trim Head Tapping Screw, with 0.237" Head Dia. No. 8 5 0.157 in 0.237 in 0.052 in 0.034 in
item-2796 Cross Recessed Flat Countersunk Trim Head Tapping Screw, with 0.262" Head Dia. No. 8 6 0.157 in 0.262 in 0.069 in 0.036 in
item-2797 Cross Recessed Flat Countersunk Trim Head Tapping Screw, with 0.312" Head Dia. No. 10 8 0.183 in 0.312 in 0.085 in 0.039 in
item-2798 Cross Recessed Flat Countersunk Trim Head Tapping Screw, with 0.312" Head Dia. No. 12 8 0.209 in 0.312 in 0.069 in 0.039 in
item-2799 Cross Recessed Flat Countersunk Trim Head Tapping Screw, with 0.362" Head Dia. No. 12 10 0.209 in 0.362 in 0.101 in 0.042 in
item-2800 Cross Recessed Flat Countersunk Trim Head Tapping Screw, with 0.362" Head Dia. No. 14 10 0.235 in 0.362 in 0.080 in 0.042 in
item-2801 Cross Recessed Flat Countersunk Trim Head Tapping Screw, with 0.412" Head Dia. No. 14 12 0.235 in 0.412 in 0.112 in 0.045 in
item-2802 Cross Recessed Flat Countersunk Trim Head Tapping Screw, with 0.362" Head Dia. 1/4 in 10 N/A 0.362 in 0.080 in 0.042 in
item-2803 Cross Recessed Flat Countersunk Trim Head Tapping Screw, with 0.412" Head Dia. 1/4 in 12 N/A 0.412 in 0.112 in 0.045 in
item-2804 Cross Recessed Flat Countersunk Trim Head Tapping Screw, with 0.412" Head Dia. 5/16 in 12 N/A 0.412 in 0.075 in 0.045 in
item-2805 Cross Recessed Flat Countersunk Trim Head Tapping Screw, with 0.477" Head Dia. 5/16 in 1/4 in N/A 0.477 in 0.116 in 0.050 in
item-2806 Cross Recessed Flat Countersunk Trim Head Tapping Screw, with 0.597" Head Dia. 3/8 in 5/16 in N/A 0.597 in 0.155 in 0.057 in
  Results 1 - 16 of 16 1 
Distributor of Industry Standard and Military Specification Threaded Fasteners