EmailEmail Us Today: info@salessystemsltd.comPhoneCall Us Toll Free: 800.368.3711
Sales Systems Limited Products and Services > Fasteners > Nuts > Structural Bolting [Nuts] > Hex Slotted Nuts > View Items  
Download PDF Download PDF         Email Email This Page     Save To Favorites Save To Favorites

Hex Slotted Nuts

Check up to five results to perform an action.

  • Unification. Bold type indicates products unified dimensionally with British and Canadian standards. Unification of fine thread nuts is limited to sizes 1 in. and under.
  • Tops and Bearing Surfaces of Nuts. Nuts in sizes 5/8 in. nominal size and smaller shall be double chamfered. Larger size nuts shall be double chamfered or have washer faced bearing surface and chamfered top.
    The diameter of chamfer circle on double chamfered nuts and diameter of washer face shall be within the limits of the maximum width across flats and 95 percent of the minimum width across flats.
    The top of washer faced nuts shall be flat and the diameter of chamfer circle shall be equal to the maximum width across flats within a tolerance of minus 15 percent. The length of chamfer at hex corners shall be from 5 to 15 percent of the basic thread diameter. The surface of chamfer may be slightly convex or rounded.
    Bearing surface shall be flat and perpendicular to the axis of the threaded hole within the specified FIM limit.
  • Width Across Flats. Maximum width across flats shall not be exceeded. No transverse section through the nut between 25 and 75 percent of the actual nut thickness as measured from the bearing surface shall be less than the minimum width across flats. For milled-from-bar nuts, see statement in General Data pertaining to the nominal bar size to be used.
  • Corner Fill. A rounding or lack of fill at junction of hex corners with chamfer shall be permissible provided the width across corners is within specified limits at and beyond a distance equal to 17.5 percent of the basic thread diameter from the chamfered faces.
  • True Position of Tapped Hole. The axis of tapped hole shall be located at true position with respect to the axis of nut body within a tolerance zone having a diameter.




Compare Items
   
  Results 1 - 14 of 14 1 

Item #

Description

Nominal Size or Basic Major Dia. of Thread

Basic (F)

Max. (G)

Basic (H)

Max. (T)

Max. (S)

HSN02500XXX Hex Slotted Nut, 1/4" Nominal Dia. 1/4 in 7/16 in 0.505 in 7/32 in 0.14 in 0.100 in
HSN03125XXX Hex Slotted Nut, 5/16" Nominal Dia. 5/16 in 1/2 in 0.577 in 17/64 in 0.18 in 0.12 in
HSN03750XXX Hex Slotted Nut, 3/8" Nominal Dia. 3/8 in 9/16 in 0.650 in 21/64 in 0.210 in 0.15 in
HSN04375XXX Hex Slotted Nut, 7/16" Nominal Dia. 7/16 in 11/16 in 0.794 in 3/8 in 0.23 in 0.15 in
HSN05000XXX Hex Slotted Nut, 1/2" Nominal Dia. 1/2 in 3/4 in 0.866 in 7/16 in 0.29 in 0.18 in
HSN05625XXX Hex Slotted Nut, 9/16" Nominal Dia. 9/16 in 7/8 in 1.010 in 31/64 in 0.31 in 0.18 in
HSN06250XXX Hex Slotted Nut, 5/8" Nominal Dia. 5/8 in 15/16 in 1.083 in 35/64 in 0.34 in 0.24 in
HSN07500XXX Hex Slotted Nut, 3/4" Nominal Dia. 3/4 in 1-1/8 in 1.299 in 41/64 in 0.40 in 0.24 in
HSN08750XXX Hex Slotted Nut, 7/8" Nominal Dia. 7/8 in 1-5/16 in 1.516 in 3/4 in 0.52 in 0.24 in
HSN10000XXX Hex Slotted Nut, 1" Nominal Dia. 1 in 1-1/2 in 1.732 in 55/64 in 0.59 in 0.30 in
HSN11250XXX Hex Slotted Nut, 1-1/8" Nominal Dia. 1-1/8 in 1-11/16 in 1.949 in 31/32 in 0.64 in 0.33 in
HSN12500XXX Hex Slotted Nut, 1-1/4" Nominal Dia. 1-1/4 in 1-7/8 in 2.165 in 1-1/16 in 0.70 in 0.40 in
HSN13750XXX Hex Slotted Nut, 1-3/8" Nominal Dia. 1-3/8 in 2-1/16 in 2.382 in 1-11/64 in 0.82 in 0.40 in
HSN15000XXX Hex Slotted Nut, 1-1/2" Nominal Dia. 1-1/2 in 2-1/4 in 2.598 in 1-9/32 in 0.86 in 0.46 in
  Results 1 - 14 of 14 1 
Distributor of Industry Standard and Military Specification Threaded Fasteners