EmailEmail Us Today: info@salessystemsltd.comPhoneCall Us Toll Free: 800.368.3711
Sales Systems Limited Products and Services > Fasteners > Bolts / Screws > Square and Hex Bolts and Screws > Heavy Hex Bolts > View Items  
Download PDF Download PDF         Email Email This Page     Save To Favorites Save To Favorites

Heavy Hex Bolts

 
Check up to five results to perform an action.

  • Surface Condition. Bolts need not be finished on any surface except threads.
  • Top of Head. Top of head shall be full form and chamfered with the diameter of chamfer circle being equal to the maximum width across flats, within a tolerance of minus 15 percent.
  • Head Taper. Maximum width across flats and across corners shall not be exceeded. No transverse section through the head between 25 percent and 75 percent of actual head height, as measured from the bearing surface, shall be less than the minimum width across flats and across corners.
  • Bearing Surface. A die seam across the bearing surface is permissible. Bearing surface shall be perpendicular to the axis of the body within a tolerance of 3 deg for 1 in. size and smaller, and 2 deg for sizes larger than 1 in. Angularity measurement shall be taken at a location to avoid interference from a die seam.
  • True Position of Head. The axis of the head shall be located at true position with respect to the axis of the body (determined over a distance under the head equal to one diameter) within a tolerance zone having a diameter equivalent to 6 percent of the maximum width across flats, regardless of feature size.



Compare Items
   
  Results 1 - 15 of 15 1 

Item #

Description

Nominal Size or Basic Product Dia.

Max. (E)

Basic (F)

Max. (G)

Basic (H)

Max. (R)
HHB05000XXX Heavy Hex Bolt, 1/2" Nominal Dia. 1/2 in 0.515 in 7/8 in 1.010 in 11/32 in 0.03 in
HHB06250XXX Heavy Hex Bolt, 5/8" Nominal Dia. 5/8 in 0.642 in 11/16 in 1.227 in 27/64 in 0.06 in
HHB07500XXX Heavy Hex Bolt, 3/4" Nominal Dia. 3/4 in 0.768 in 1-1/4 in 1.443 in 1/2 in 0.06 in
HHB08750XXX Heavy Hex Bolt, 7/8" Nominal Dia. 7/8 in 0.895 in 1-7/16 in 1.660 in 37/64 in 0.06 in
HHB10000XXX Heavy Hex Bolt, 1" Nominal Dia. 1 in 1.022 in 1-5/8 in 1.876 in 43/64 in 0.09 in
HHB11250XXX Heavy Hex Bolt, 1-1/8" Nominal Dia. 1-1/8 in 1.149 in 1-13/16 in 2.093 in 3/4 in 0.09 in
HHB12500XXX Heavy Hex Bolt, 1-1/4" Nominal Dia. 1-1/4 in 1.277 in 2 in 2.309 in 27/32 in 0.09 in
HHB13750XXX Heavy Hex Bolt, 1-3/8" Nominal Dia. 1-3/8 in 1.404 in 2-3/16 in 2.526 in 29/32 in 0.09 in
HHB15000XXX Heavy Hex Bolt, 1-1/2" Nominal Dia. 1-1/2 in 1.531 in 2-3/8 in 2.742 in 1 in 0.09 in
HHB17500XXX Heavy Hex Bolt, 1-3/4" Nominal Dia. 1-3/4 in 1.785 in 2-3/4 in 3.175 in 1-5/32 in 0.12 in
HHB20000XXX Heavy Hex Bolt, 2" Nominal Dia. 2 in 2.039 in 3-1/8 in 3.608 in 1-11/32 in 0.12 in
HHB22500XXX Heavy Hex Bolt, 2-1/4" Nominal Dia. 2-1/4 in 2.305 in 3-1/2 in 4.041 in 1-1/2 in 0.19 in
HHB25000XXX Heavy Hex Bolt, 2-1/2" Nominal Dia. 2-1/2 in 2.559 in 3-7/8 in 4.474 in 1-21/32 in 0.19 in
HHB27500XXX Heavy Hex Bolt, 2-3/4" Nominal Dia. 2-3/4 in 2.827 in 4-1/4 in 4.907 in 1-13/16 in 0.19 in
HHB30000XXX Heavy Hex Bolt, 3" Nominal Dia. 3 in 3.081 in 4-5/8 in 5.340 in 2 in 0.19 in
  Results 1 - 15 of 15 1 
Distributor of Industry Standard and Military Specification Threaded Fasteners