Item # TCTSBT00730XXX, Thread Cutting Tapping Screws Type BT, with 0.0730" Nominal Dia. On Sales Systems Ltd.

Email

Email Us Today: info@salessystemsltd.com Phone

Phone

Call Us Toll Free: 800.368.3711

Contact UsRequest Information

Use trailing wildcard (*) for broader results. Fasteners Anchors/Weld Studs Bolts/Screws Nuts Pipe Hangers Sockets Studs Washers Miscellaneous Fasteners Services Mechanical Testing Chemical Analysis Metallurgical Testing Non-Destructive Testing

UKAS | Quality Management

ISO 9001:2008 Compliant
SSL Credit Application

(PDF - 112KB)


	Reference Guide Only. Not Actual Inventory.

Sales Systems Limited Products and Services > Fasteners Reference Guide > Bolts / Screws > Tapping Screws > Thread Cutting Tapping Screws Type BT > Item # TCTSBT00730XXX


	Item # TCTSBT00730XXX, Thread Cutting Tapping Screws Type BT, with 0.0730" Nominal Dia.

Points of screws shall be tapered and fluted or slotted as illustrated above for the respective types. The flute on Type BT screws shall have an included angle of 90º to 95º and the thread cutting edge located above the axis of screw. Tapered threads shall have unfinished crests, and the flutes or slots shall extend through first full form thread beyond taper except for Type BF screw son which tapered threads may be complete at manufacturer's option and flutes may be one pitch short of first full form thread. Other details of taper and flute design shall be optional with manufacturer, provided the screws meet the specified performance requirements.
The width of flat at crest of thread shall not exceed 0.004 in. for sizes up to and including No. 8, and 0.006 in. for larger sizes.
Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.

Types BT

larger image

Detail of Thread Form

larger image

Manufacturer · Specifications · Codes and Standards · Threads Per Inch

Manufacturer

Manufacturer		Industrial Fasteners Institute

Specifications

Product		Tapping Screws

Unit of Measure		English

Nominal Size or Basic Screw Dia.		No. 1

Nominal Size or Basic Screw Dia. (Decimal)		0.0730 in

Max. Major Dia. (D)		0.075 in

Min. Major Dia. (D)		0.069 in

Max. Minor Dia. (d)		0.049 in

Min. Minor Dia. (d)		0.046 in

Ref. Point Dia. (P)		0.044 in

Max. Point Taper Length (S)		0.048 in

Min. Point Taper Length (S)		0.036 in

Min. Practical Nominal Screw Lengths for 90º Heads (L)		1/8 in

Min. Practical Nominal Screw Lengths for Csk Heads (L)		5/32 in

Codes and Standards

Codes and Standards		ASME B18.6.4 1998

Threads Per Inch

Threads Per Inch		42

DOWNLOADS


		Type Designations for Tapping Screws and Metallic Drive Screws (PDF, 206KB)

Privacy Policy Site Map Catalog Index Site created by ThomasNet Web Solutions and powered by Navigator Platform