Item # HB08750XXX, Hex Bolt, 7/8" Nominal Dia. On Sales Systems Ltd.

Email

Email Us Today: info@salessystemsltd.com Phone

Phone

Call Us Toll Free: 800.368.3711

Contact UsRequest Information

Use trailing wildcard (*) for broader results. Fasteners Anchors/Weld Studs Bolts/Screws Nuts Pipe Hangers Sockets Studs Washers Miscellaneous Fasteners Services Mechanical Testing Chemical Analysis Metallurgical Testing Non-Destructive Testing

UKAS | Quality Management

ISO 9001:2008 Compliant
SSL Credit Application

(PDF - 112KB)


	Reference Guide Only. Not Actual Inventory.

Sales Systems Limited Products and Services > Fasteners Reference Guide > Bolts / Screws > Square and Hex Bolts and Screws > Hex Bolts > Item # HB08750XXX


	Item # HB08750XXX, Hex Bolt, 7/8" Nominal Dia.

Rolled Thread Hex Bolts

larger image

Surface Condition. Bolts need not be finished on any surface except threads.
Top of Head. Top of head shall be full form and chamfered with the diameter of chamfer circle being equal to the maximum width across flats, within a tolerance of minus 15 percent.
Head Taper. Maximum width across flats and across corners shall not be exceeded. No transverse section through the head between 25 percent and 75 percent of actual head height, as measured from the bearing surface, shall be less than the minimum width across flats and across corners.
Bearing Surface. A die seam across the bearing surface is permissible. Bearing surface shall be perpendicular to the axis of the body within a tolerance of 3 deg for 1.

Manufacturer · Specifications · Codes and Standards · Thread Length for Bolt Lengths

Manufacturer

Manufacturer		Industrial Fasteners Institute

Specifications

Product		Square and Hex Bolts and Screws

Unit of Measure		English

Nominal Size or Basic Product Diameter		7/8 in

Nominal Size or Basic Product Diameter (Decimal)		0.8750 in

Max. Full-Size Body Diameter (E)		0.895 in

Min. Full-Size Body Diameter (E)		0.852 in

Basic Width Across Flats (F)		1-5/16 in

Max. Width Across Flats (F)		1.312 in

Min. Width Across Flats (F)		1.269 in

Max. Width Across Corners (G)		1.516 in

Min. Width Across Corners (G)		1.447 in

Basic Head Height (H)		37/64 in

Max. Head Height (H)		0.604 in

Min. Head Height (H)		0.531 in

Max. Radius of Fillet (R)		0.06 in

Min. Radius of Fillet (R)		0.020 in

Codes and Standards

Codes and Standards		ASME B18.2.1 1996

Thread Length for Bolt Lengths

Nom. L_T for Bolt Length (6 in. and Shorter)		2.000 in

Nom. L_T for Bolt Length (Over 6 in.)		2.250 in

MORE IMAGES


	· Bolt with Reduced Diameter Body

	· Length Tolerances for Square and Hex Bolts and Screws

Privacy Policy Site Map Catalog Index Site created by ThomasNet Web Solutions and powered by Navigator Platform