Item # HKB2000XXX, Hexagon Key and Bit, 2.000" Nominal Dia. On Sales Systems Ltd.

Email

Email Us Today: info@salessystemsltd.com Phone

Phone

Call Us Toll Free: 800.368.3711

Contact UsRequest Information

Use trailing wildcard (*) for broader results. Fasteners Anchors/Weld Studs Bolts/Screws Nuts Pipe Hangers Sockets Studs Washers Miscellaneous Fasteners Services Mechanical Testing Chemical Analysis Metallurgical Testing Non-Destructive Testing

UKAS | Quality Management

ISO 9001:2008 Compliant
SSL Credit Application

(PDF - 112KB)


	Reference Guide Only. Not Actual Inventory.

Sales Systems Limited Products and Services > Fasteners Reference Guide > Bolts / Screws > Socket Screws > Hexagon Keys and Bits > Item # HKB2000XXX


	Item # HKB2000XXX, Hexagon Key and Bit, 2.000" Nominal Dia.

Hexagon Keys and Bits

larger image

Each end shall be square with the axis of each arm within 4 deg, and edges may be sharp or chamfered at the option of the manufacturer. The chamfer shall not exceed the values listed.
Any truncation or rounding of hexagon corners within the specified across-corner dimensions shall be evident on all corners.
Material (Steel Alloy). Hexagon keys and bits shall be fabricated from an alloy steel having two or more of the following alloying elements: chromium, nickel, molybdenum, or vanadium, in sufficient quantity to assure that the specified minimum hardness of 48 HRC at the surface for sizes up to and including 3/8 in., and 45 HRC for sizes over 3/8 in., is met when hexagon keys and bits are hardened by quenching from the austenitizing temperature and tempered.

Manufacturer · Specifications · Codes and Standards

Manufacturer

Manufacturer		Industrial Fasteners Institute

Specifications

Product		Socket Screws

Unit of Measure		English

Nominal Key or Bit and Socket Size		2 in

Nominal Key or Bit and Socket Size (Decimal)		2.0000 in

Max. Hexagon Width Across Flats (W)		2.0000 in

Min. Hexagon Width Across Flats (W)		1.9930 in

Max. Hexagon Width Across Corners (Y)		2.2939 in

Min. Hexagon Width Across Corners (Y)		2.2668 in

Max. Length (B)		4.750 in

Min. Length (B)		4.250 in

Max. Short Arm Series Length (C)		17.500 in

Min. Short Arm Series Length (C)		17.000 in

Min. Radius of Bend (R)		2.000 in

Length of Bit (L)		6 in

Tolerance for L		±0.062 in

Max. Chamfer (K)		0.126 in

Codes and Standards

Codes and Standards		ASME B18.3 2002

Privacy Policy Site Map Catalog Index Site created by ThomasNet Web Solutions and powered by Navigator Platform