EmailEmail Us Today: info@salessystemsltd.comPhoneCall Us Toll Free: 800.368.3711
Reference Guide Only. Not Actual Inventory.
Sales Systems Limited Products and Services > Fasteners Reference Guide > Bolts / Screws > Slotted Cap Screws > Slotted Flat Countersunk Head Cap Screws > Item # SFCHCS02500XXX  
Download PDF Download PDF         Email Email This Page     Save To Favorites Save To Favorites

Item # SFCHCS02500XXX, Slotted Flat Countersunk Head Cap Screw, with 0.2500" Body Dia.


  • Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.
  • Tabulated values were determined from the formula for maximum H
  • No tolerance for gaging diameter is given. If the gaging diameter of the gage used differs from the tabulated value, the protrusion will be affected accordingly, and the proper protrusion values shall be recalculated using the formulas shown in Appendix.




Manufacturer  · Specifications  · Codes and Standards

Manufacturer

Manufacturer
Industrial Fasteners Institute


Specifications

Product
Slotted Cap Screws

Unit of Measure
English

Nominal Size or Basic Screw Dia.
1/4 in

Nominal Size or Basic Screw Dia. (Decimal)
0.2500 in

Max. Body Dia. (E)
0.2500 in

Min. Body Dia. (E)
0.2450 in

Max. Edge Sharp Head Dia. (A)
0.500 in

Min. Edge Rounded or Flat Head Dia. (A)
0.452 in

Ref. Head Height (H)
0.140 in

Max. Slot Width (J)
0.075 in

Min. Slot Width (J)
0.064 in

Max. Slot Depth (T)
0.068 in

Min. Slot Depth (T)
0.045 in

Max. Fillet Radius (U)
0.100 in

Max. Protrusion Above Gaging Dia. (F)
0.046 in

Min. Protrusion Above Gaging Dia. (F)
0.030 in

Gaging Dia. (G)
0.424 in


Codes and Standards

Codes and Standards
ASME B18.6.2 1998


Distributor of Industry Standard and Military Specification Threaded Fasteners