EmailEmail Us Today: info@salessystemsltd.comPhoneCall Us Toll Free: 800.368.3711
Reference Guide Only. Not Actual Inventory.
Sales Systems Limited Products and Services > Fasteners Reference Guide > Bolts / Screws > Round Head Bolts > Countersunk Bolts and Slotted Countersunk Bolts > Item # CBSCB07500XXX  
Download PDF Download PDF         Email Email This Page     Save To Favorites Save To Favorites

Item # CBSCB07500XXX, Countersunk Bolt and Slotted Countersunk Bolt, with 0.768" Body Dia.


  • Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
  • Flat on minimum diameter head calculated on minimum sharp and absolute minimum head diameters and 82 deg head angle.
  • Head shall be unslotted, unless otherwise specified. Slot dimensions are same as Slotted Flat Countersunk Head Cap Screws in American National Standard, ASME B18.6.2.
  • Maximum head height calculated on maximum sharp head diameter, basic bolt diameter and 78 deg head angle.
  • Minimum head height calculated on minimum sharp head diameter, basic bolt diameter and 82 deg head angle.




Manufacturer  · Specifications  · Codes and Standards

Manufacturer

Manufacturer
Industrial Fasteners Institute


Specifications

Product
Round Head Bolts

Unit of Measure
English

Nominal Size or Basic Bolt Dia.
3/4 in

Nominal Size or Basic Bolt Dia. (Decimal)
0.7500 in

Max. Body Dia. (E)
0.768 in

Min. Body Dia. (E)
0.729 in

Max. Edge Sharp Head Dia. (A)
1.402 in

Min. Edge Sharp Head Dia. (A)
1.357 in

Absolute Min. Edge Rounded or Flat Head Dia. (A)
1.285 in

Max. Flat on Min. Dia. Head (F)
0.041 in

Max. Head Height (H)
0.403 in

Min. Head Height (H)
0.349 in

Max. Slot Width (J)
0.149 in

Min. Slot Width (J)
0.131 in

Max. Slot Depth (T)
0.171 in

Min. Slot Depth (T)
0.115 in


Codes and Standards

Codes and Standards
ASME B18.5 1990 (R1998)


Distributor of Industry Standard and Military Specification Threaded Fasteners