Item # item-2495, Hexagon Key Engagements for Cone and Oval Point Short Length Set Screw, 0.0730" Nominal Dia. On Sales Systems Ltd.

Use trailing wildcard (*) for broader results. Fasteners Anchors/Weld Studs Bolts/Screws Nuts Pipe Hangers Sockets Studs Washers Miscellaneous Fasteners Services Mechanical Testing Chemical Analysis Metallurgical Testing Non-Destructive Testing

ISO 9001:2008 Compliant
SSL Credit Application

(PDF - 112KB)


	Reference Guide Only. Not Actual Inventory.

Sales Systems Limited Products and Services > Fasteners Reference Guide > Bolts / Screws > Socket Screws > Hexagon Key Engagements for Short Length Set Screws > Item # item-2495


	Item # item-2495, Hexagon Key Engagements for Cone and Oval Point Short Length Set Screw, 0.0730" Nominal Dia.

larger image

Caution: The use of short length set screws listed in this table can result in failure of the socket, key, or mating threads during tightening because key engagement and thread length are less than optimum. Therefore, it is strongly recommended that screws of lengths equal to or greater than the lengths specified in Table to be used wherever possible.

Cone point angle for these lengths shall be 90 deg

Manufacturer · Specifications · Codes and Standards

Manufacturer

Manufacturer		Industrial Fasteners Institute

Specifications

Product		Socket Screws

Unit of Measure		English

Nominal Size or Basic Screw Dia.		No. 1

Nominal Size or Basic Screw Dia. (Decimal)		0.0730 in

Nom. Hexagon Socket Size (J)		0.035 in

Nom. Hexagon Socket Size Decimal (J)		0.035 in

Nominal Screw Lengths (L)		0.09 in

118 Deg Cone and Oval Points Minimum Key Engagement (T_H)		0.040 in

Codes and Standards

Codes and Standards		ASME B18.3 2002

Item # item-2495, Hexagon Key Engagements for Cone and Oval Point Short Length Set Screw, 0.0730" Nominal Dia.

Manufacturer

Product

Unit of Measure

Nominal Size or Basic Screw Dia.

Nominal Size or Basic Screw Dia. (Decimal)

Nom. Hexagon Socket Size (J)

Nom. Hexagon Socket Size Decimal (J)

Nominal Screw Lengths (L)

118 Deg Cone and Oval Points Minimum Key Engagement (TH)

Codes and Standards

118 Deg Cone and Oval Points Minimum Key Engagement (T_H)