EmailEmail Us Today: info@salessystemsltd.comPhoneCall Us Toll Free: 800.368.3711
Reference Guide Only. Not Actual Inventory.
Sales Systems Limited Products and Services > Fasteners Reference Guide > Nuts > Machine Screw Nuts > Hex Machine Screw Nuts > Item # HMSN00860XXX  
Download PDF Download PDF         Email Email This Page     Save To Favorites Save To Favorites

Item # HMSN00860XXX, Hex Machine Screw Nut, with 0.217" Width Across Corner


  • Hexagon machine screw nuts shall have tops flat with chamfered corners. Diameter of top circle shall be equal to the maximum width across flats within a tolerance of minus 15 percent. The bearing surface shall be perpendicular to the axis of the threaded hole pitch cylinder within a tolerance of 4 deg.
  • Bottoms of hexagon machine screw nuts are normally flat, but for special purposes may be chamfered, if so specified by purchaser.
  • Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.




Manufacturer  · Specifications  · Codes and Standards

Manufacturer

Manufacturer
Industrial Fasteners Institute


Specifications

Product
Machine Screw Nuts

Unit of Measure
English

Nominal Size or Basic Thread Dia.
No. 2

Nominal Size or Basic Thread Dia. (Decimal)
0.0860 in

Basic Width Across Flats (F)
3/16 in

Max. Width Across Flats (F)
0.188 in

Min. Width Across Flats (F)
0.180 in

Max. Width Across Corners (G1)
0.217 in

Min. Width Across Corners (G1)
0.205 in

Max. Thickness (H)
0.066 in

Min. Thickness (H)
0.057 in


Codes and Standards

Codes and Standards
ANSI/ASME B18.6.3 1998


Distributor of Industry Standard and Military Specification Threaded Fasteners