Sales Systems, Limited
Sales Systems, Limited
700 Florida Avenue
Portsmouth, Virginia 23707
Toll Free: 800.368.3711
Phone: 757.397.0763
Fax Sales: 757.393.3669
Email: info@salessystemsltd.com
Website: www.salessystemsltd.com
Print Back
  • Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
  • Applicable to screw types as indicated by code symbols.
    Type AB thread forming.
    Types B and BP thread forming and Types BF and BT thread cutting.
    Type C thread forming, Appendix; and Types D, F, G, and T thread cutting.
  • A slight rounding of all edges and corners of the hex surfaces of indented hex heads shall be permissible, provided the diameter of the bearing circle is equal to no less than 90% of the specified minimum width across flats dimension.
  • Unless otherwise specified by purchaser, regular hex heads shall be furnished, and both regular and large head styles may be of indented head, trimmed head, or fully upset head construction, at the option of manufacturer.
  • Dimensions across flats and across corners of the head shall be measured at the point of maximum metal. Taper of sides of hex (angle between one side and the axis) shall not exceed 2° or 0.004", whichever is greater, the specified width across flats being the large dimension.
  • The rounding due to lack of fill on all six corners of the head shall be reasonably uniform and the width across corners of the head shall be such that when a sharp ring having an inside diameter equal to the specified minimum width across corners is placed on the top and bottom of the head, the head shall protrude by an amount equal to, or greater than, the F value tabulated. See Appendix II for across corners gaging of hex heads.
  • Large hex head is intended for screw and washer assemblies - SEMS, as specified in ASME B18.1 and other applications requiring large bearing.
Regular and Large Hex Head Tapping Screws
Unit of Measure
1 

Item #

Description

Nominal Size or Basic Screw Dia.

Max. (A)

Min. (W)

Max. (H)

Min. (F)

RHHTS00730XXX N/A Regular Hex Head Tapping Screw, with 0.0730" Nominal Dia. N/A No. 1 N/A 0.125 in N/A 0.134 in N/A 0.044 in N/A 0.022 in
RHHTS00860XXX N/A Regular Hex Head Tapping Screw, with 0.0860" Nominal Dia. N/A No. 2 N/A 0.125 in N/A 0.134 in N/A 0.050 in N/A 0.024 in
RHHTS00990XXX N/A Regular Hex Head Tapping Screw, with 0.0990" Nominal Dia. N/A No. 3 N/A 0.188 in N/A 0.202 in N/A 0.055 in N/A 0.026 in
RHHTS01120XXX N/A Regular Head Hex Tapping Screw, with 0.1120" Nominal Dia. N/A No. 4 N/A 0.188 in N/A 0.202 in N/A 0.060 in N/A 0.029 in
RHHTS01250XXX N/A Regular Head Hex Tapping Screw, with 0.1250" Nominal Dia. N/A No. 5 N/A 0.188 in N/A 0.202 in N/A 0.070 in N/A 0.035 in
RHHTS01380XXX N/A Regular Head Hex Tapping Screw, with 0.1380" Nominal Dia. N/A No. 6 N/A 0.250 in N/A 0.272 in N/A 0.093 in N/A 0.048 in
RHHTS01510XXX N/A Regular Head Hex Tapping Screw, with 0.1510" Nominal Dia. N/A No. 7 N/A 0.250 in N/A 0.272 in N/A 0.093 in N/A 0.048 in
RHHTS01640XXX N/A Regular Head Hex Tapping Screw, with 0.1640" Nominal Dia. N/A No. 8 N/A 0.250 in N/A 0.272 in N/A 0.110 in N/A 0.058 in
RHHTS01900XXX N/A Regular Head Hex Tapping Screw, with 0.1900" Nominal Dia. N/A No. 10 N/A 0.312 in N/A 0.340 in N/A 0.120 in N/A 0.063 in
RHHTS02160XXX N/A Regular Head Hex Tapping Screw, with 0.2160" Nominal Dia. N/A No. 12 N/A 0.312 in N/A 0.340 in N/A 0.155 in N/A 0.083 in
RHHTS02420XXX N/A Regular Head Hex Tapping Screw, with 0.2420" Nominal Dia. N/A No. 14 N/A 0.375 in N/A 0.409 in N/A 0.190 in N/A 0.103 in
RHHTS02500XXX N/A Regular Head Hex Tapping Screw, with 0.2500" Nominal Dia. N/A 1/4 in N/A 0.375 in N/A 0.409 in N/A 0.190 in N/A 0.103 in
RHHTS03125XXX N/A Regular Head Hex Tapping Screw, with 0.3125" Nominal Dia. N/A 5/16 in N/A 0.500 in N/A 0.545 in N/A 0.230 in N/A 0.125 in
RHHTS03200XXX N/A Regular Head Hex Tapping Screw, with 0.3200" Nominal Dia. N/A No. 20 N/A 0.500 in N/A 0.545 in N/A 0.230 in N/A 0.125 in
RHHTS03720XXX N/A Regular Head Hex Tapping Screw, with 0.3720" Nominal Dia. N/A No. 24 N/A 0.562 in N/A 0.614 in N/A 0.295 in N/A 0.162 in
RHHTS03750XXX N/A Regular Head Hex Tapping Screw, with 0.3750" Nominal Dia. N/A 3/8 in N/A 0.562 in N/A 0.614 in N/A 0.295 in N/A 0.162 in
RHHTS04375XXX N/A Regular Head Hex Tapping Screw, with 0.4375" Nominal Dia. N/A 7/16 in N/A 0.625 in N/A 0.682 in N/A 0.348 in N/A 0.193 in
RHHTS05000XXX N/A Regular Head Hex Tapping Screw, with 0.5000" Nominal Dia. N/A 1/2 in N/A 0.750 in N/A 0.820 in N/A 0.400 in N/A 0.220 in
Unit of Measure
1