Item # LHHSCS05000XXX, Low Head Hexagon Socket Cap Screw, 0.5000" Nominal Dia. On Sales Systems Ltd.

General Note: This product, although a high strength precision fastener, is recommended for lighter fastening applications. It is not suggested for use in critical high strength applications where socket head cap screws should normally be used. They are designed to be used in applications where head height clearance is a problem. Because of their reduced head height, and smaller socket size, they normally cannot be properly preloaded as a standard socket cap screw and should not be subjected to high dynamic loads.

Nominal Size. Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
Body. The term body refers to the unthreaded cylindrical portion of the shank for those screws not threaded to the head.
Head Diameter. Heads shall be plain, not knurled.
Head Chamfer. The top of the head shall be flat. The intersection of the top of the head and side of the head may be chamfered or radiused within the limits of C, at the manufacturer's option.
Bearing Surface. The plane of the bearing surface shall be perpendicular to the axis of the shank, with a maximum deviation of one degree, obtained by holding the screw on the body or major thread diameter within one dia. of the bearing surface of the head, but beyond the maximum

Unit of Measure

Manufacturer | Specifications | Codes and Standards

Manufacturer

N/A Industrial Fasteners Institute

Specifications

Product	N/A Socket Screws
Unit of Measure	N/A English
Nominal Size or Basic Screw Dia.	N/A 1/2 in
Nominal Size or Basic Screw Dia. (Decimal)	N/A 0.5000 in
Max. Body Diameter (D)	N/A 0.5 in
Min. Body Diameter (D)	N/A 0.4919 in
Max. Head Diameter (A)	N/A 0.750 in
Min. Head Diameter (A)	N/A 0.743 in
Max. Head Height (H)	N/A 0.254 in
Min. Head Height (H)	N/A 0.244 in
Max. Chamfer or Radius (C)	N/A 0.055 in
Nom. Hexagon Socket Size (J)	N/A 1/4 in
Nom. Hexagon Socket Size Decimal (J)	N/A 0.250 in
Min. Key Engagement (T)	N/A 0.151 in
Max. Chamfer or Radius (K)	N/A 0.015 in

Codes and Standards

N/A ASME B18.3 2002

Manufacturer

Manufacturer

Specifications

Product

Unit of Measure

Nominal Size or Basic Screw Dia.

Nominal Size or Basic Screw Dia. (Decimal)

Max. Body Diameter (D)

Min. Body Diameter (D)

Max. Head Diameter (A)

Min. Head Diameter (A)

Max. Head Height (H)

Min. Head Height (H)

Max. Chamfer or Radius (C)

Nom. Hexagon Socket Size (J)

Nom. Hexagon Socket Size Decimal (J)

Min. Key Engagement (T)

Max. Chamfer or Radius (K)

Codes and Standards

Codes and Standards