Item # HKB0219XXX, Hexagon Key and Bit, 0.219" Nominal Dia. On Sales Systems Ltd.

Each end shall be square with the axis of each arm within 4 deg, and edges may be sharp or chamfered at the option of the manufacturer. The chamfer shall not exceed the values listed.
Any truncation or rounding of hexagon corners within the specified across-corner dimensions shall be evident on all corners.
Material (Steel Alloy). Hexagon keys and bits shall be fabricated from an alloy steel having two or more of the following alloying elements: chromium, nickel, molybdenum, or vanadium, in sufficient quantity to assure that the specified minimum hardness of 48 HRC at the surface for sizes up to and including 3/8 in., and 45 HRC for sizes over 3/8 in., is met when hexagon keys and bits are hardened by quenching from the austenitizing temperature and tempered.

Unit of Measure

Manufacturer | Specifications | Codes and Standards

N/A Industrial Fasteners Institute

Product	N/A Socket Screws
Unit of Measure	N/A English
Nominal Key or Bit and Socket Size	N/A 7/32 in
Nominal Key or Bit and Socket Size (Decimal)	N/A 0.219 in
Max. Hexagon Width Across Flats (W)	N/A 0.2187 in
Min. Hexagon Width Across Flats (W)	N/A 0.2172 in
Max. Hexagon Width Across Corners (Y)	N/A 0.2490 in
Min. Hexagon Width Across Corners (Y)	N/A 0.2460 in
Max. Length (B)	N/A 1.125 in
Min. Length (B)	N/A 0.938 in
Max. Short Arm Series Length (C)	N/A 3.094 in
Min. Short Arm Series Length (C)	N/A 2.906 in
Max. Long Arm Series Length (C)	N/A 4.969 in
Min. Long Arm Series Length (C)	N/A 4.781 in
Min. Radius of Bend (R)	N/A 0.219 in
Max. Chamfer (K)	N/A 0.024 in

N/A ASME B18.3 2002

Manufacturer