Sales Systems Ltd. - Compressible Washer - Type Direct Tension Indicators

Dimensional Conformance. Direct tension indicators shall have the following characteristics inspected to ASME B18.18.2, page M-11, to the inspection levels shown:
Characteristic
Inside Diameter - B (Inspection Level)
Protrusion tangential diameter - B (Inspection Level)
Visual - C (Inspection Level)
If verifiable in-process inspection is used
Nominal direct tension indicator sizes are intended for use with fasteners of the same nominal diameter.

Compressible Washer-Type Direct Tension Indicators 1

Unit of Measure

Items	CWDTIA0523XXX Compressible Washer - Type A325 Direct Tension Indicator, with 1/2"	CWDTIA0654XXX Compressible Washer - Type A325 Direct Tension Indicator, with 5/8"	CWDTIA0786XXX Compressible Washer - Type A325 Direct Tension Indicator, with 3/4"	CWDTIA0917XXX Compressible Washer - Type A325 Direct Tension Indicator, with 7/8"	CWDTIA1048XXX Compressible Washer - Type A325 Direct Tension Indicator, with 1"
Manufacturer	N/A Industrial Fasteners Institute
Product	N/A Structural Bolting
Codes and Standards	N/A ASME Draft Revision B18.2.6 2003
Unit of Measure	N/A English
Type	N/A Type A325
Direct Tension Indicator Size¹	N/A 1/2 in	N/A 5/8 in	N/A 3/4 in	N/A 7/8 in	N/A 1 in
Min. Inside Dia. (A)	N/A 0.523 in	N/A 0.654 in	N/A 0.786 in	N/A 0.917 in	N/A 1.048 in
Max. Inside Dia. (A)	N/A 0.527 in	N/A 0.658 in	N/A 0.790 in	N/A 0.921 in	N/A 1.052 in
Max. Protrusion Tangential Dia. (B)	N/A 0.788 in	N/A 0.956 in	N/A 1.125 in	N/A 1.294 in	N/A 1.463 in
Min. Outside Dia. (C)	N/A 1.167 in	N/A 1.355 in	N/A 1.605 in	N/A 1.855 in	N/A 1.980 in
Max. Outside Dia. (C)	N/A 1.187 in	N/A 1.375 in	N/A 1.625 in	N/A 1.875 in	N/A 2.000 in
No. of Protrusions (Equally Spaced)	N/A 4	N/A 4	N/A 5	N/A 5	N/A 6
Min. Thickness without Protrusion	N/A 0.104 in	N/A 0.126 in	N/A 0.126 in	N/A 0.142 in	N/A 0.158 in
Max. Thickness with Protrusion	N/A 0.180 in	N/A 0.220 in	N/A 0.230 in	N/A 0.240 in	N/A 0.270 in
¹ Nominal direct tension indicator sizes are intended for use with fasteners of the same nominal diameter.