Sales Systems, Limited
Sales Systems, Limited
700 Florida Avenue
Portsmouth, Virginia 23707
Toll Free: 800.368.3711
Phone: 757.397.0763
Fax Sales: 757.393.3669
Email: info@salessystemsltd.com
Website: www.salessystemsltd.com
Print Back
  • Nominal Size. Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
  • Length. The length of the screw shall be measured overall, parallel to the axis of the screw. The basic length dimension on the product shall be the nominal length expressed as a two-place decimal.
Hexagon and Spline Socket Set Screws
Unit of Measure
Items Hexagon and Spline Socket Set Screws
item-2133
Hexagon and Spline Socket Cup and Flat Point Set Screw, 0.0600" Nominal Dia. 		Hexagon and Spline Socket Set Screws
item-2134
Hexagon and Spline Socket Cup and Flat Point Set Screw, 0.0730" Nominal Dia. 		Hexagon and Spline Socket Set Screws
item-2135
Hexagon and Spline Socket Cup and Flat Point Set Screw, 0.0860" Nominal Dia. 		Hexagon and Spline Socket Set Screws
item-2136
Hexagon and Spline Socket Cup and Flat Point Set Screw, 0.0990" Nominal Dia. 		Hexagon and Spline Socket Set Screws
item-2137
Hexagon and Spline Socket Cup and Flat Point Set Screw, 0.1120" Nominal Dia.
Manufacturer N/A Industrial Fasteners Institute
Product N/A Socket Screws
Codes and Standards N/A ASME B18.3 2002
Unit of Measure N/A English
Type N/A Cup and Flat Point
Nominal Size or Basic Screw Diameter N/A No. 0 N/A No. 1 N/A No. 2 N/A No. 3 N/A No. 4
Nominal Size or Basic Screw Diameter (Decimal) N/A 0.0600 in N/A 0.0730 in N/A 0.0860 in N/A 0.0990 in N/A 0.1120 in
Nom. Hexagon Socket Size (J) N/A
Nom. Hexagon Socket Size Decimal (J) N/A 0.028 in N/A 0.028 in N/A 0.035 in N/A 0.050 in N/A 0.050 in
Nom. No. of Splines N/A 4 N/A 4 N/A 4 6 N/A 4 6 N/A 6
Nom. Spline Socket Size Decimal (M) N/A 0.033 in N/A 0.033 in N/A 0.048 in N/A 0.048 in N/A 0.060 in
Hex Socket TH Min. Key Engagement to Develop Functional Capability of Key (T) N/A 0.050 in N/A 0.060 in N/A 0.060 in N/A 0.070 in N/A 0.070 in
Spline Socket Ts Min. Key Engagement to Develop Functional Capability of Key (T) N/A 0.026 in N/A 0.035 in N/A 0.040 in N/A 0.040 in N/A 0.045 in
Max. Cup and Flat Point Diameters (C) N/A 0.033 in N/A 0.040 in N/A 0.047 in N/A 0.054 in N/A 0.061 in
Min. Cup and Flat Point Diameters (C) N/A 0.027 in N/A 0.033 in N/A 0.039 in N/A 0.045 in N/A 0.051 in
Basic Oval Point Radius (R) N/A
Cone Point Angle (Y)1 N/A
Max. Half Dog Point Diameter (P) N/A
Min. Half Dog Point Diameter (P) N/A
Max. Half Dog Point Length (Q) N/A
Min. Half Dog Point Length (Q) N/A
Cup and Flat Points Shortest Optimum Nominal Length to Which TH Applies (B) N/A 0.13 in N/A 0.13 in N/A 0.13 in N/A 0.19 in N/A 0.19 in
90 Deg. Cone and Oval Points Shortest Optimum Nominal Length to Which TH Applies (B) N/A
Half Dog Point Shortest Optimum Nominal Length to Which TH Applies (B) N/A
Cup and Flat Points Shortest Optimum Nominal Length to Which Ts Applies (B1) N/A 0.06 in N/A 0.13 in N/A 0.13 in N/A 0.13 in N/A 0.13 in
90 Deg. Cone and Oval Points Shortest Optimum Nominal Length to Which Ts Applies (B1) N/A
Half Dog Point Shortest Optimum Nominal Length to Which Ts Applies (B1) N/A
  • 1 90 Deg. ±2 Deg. for These Nominal Lengths or Longer: 118 Deg. ±2 Deg. for Shorter Nominal Lengths