Email Us Today: 
Call Us Toll Free: 
- Threads within point taper length shall have unfinished crests.
- The width of flat at crest of thread shall not exceed 0.004 in. for sizes up to and including No. 8, and 0.006 in. for larger sizes.
- Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
- For determining the effective grip length of BP screws.
Unit of Measure
Specifications
Product |
N/A Tapping Screws |
Unit of Measure |
N/A English |
Nominal Size or Basic Screw Dia. |
N/A No. 1 |
Nominal Size or Basic Screw Dia. (Decimal) |
N/A 0.0730 in |
Max. Major Dia. (D) |
N/A 0.075 in |
Min. Major Dia. (D) |
N/A 0.069 in |
Max. Minor Dia. (d) |
N/A 0.049 in |
Min. Minor Dia. (d) |
N/A 0.046 in |
Ref. Point Dia. (P) |
N/A 0.044 in |
Max. Point Taper Length (S) |
N/A 0.048 in |
Min. Point Taper Length (S) |
N/A 0.036 in |
Min. Practical Nominal Screw Lengths for 90º Heads (L) |
N/A 3/16 in |
Min. Practical Nominal Screw Lengths for Csk Heads (L) |
N/A 7/32 in |
