Email Us Today: 
Call Us Toll Free: 
- No extrusion of excess metal beyond apex of the point resulting from thread rolling shall be permissible. A slight rounding or truncation of the point is desirable.
- The width of flat at crest of thread shall not exceed 0.004 in. for sizes up to and including No. 8, and 0.006 in. for larger sizes.
- Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
- Sizes shown in boldface type are preferred.
- For determining the effective grip length of Type AB screws.
Unit of Measure
Specifications
Product |
N/A Tapping Screws |
Unit of Measure |
N/A English |
Nominal Size or Basic Screw Dia. |
N/A No. 6 |
Nominal Size or Basic Screw Dia. (Decimal) |
N/A 0.1380 in |
Max. Major Dia. (D) |
N/A 0.139 in |
Min. Major Dia. (D) |
N/A 0.132 in |
Max. Minor Dia. (d) |
N/A 0.104 in |
Min. Minor Dia. (d) |
N/A 0.099 in |
Min. Practical Nominal Screw Lengths for 90º Heads (L) |
N/A 9/32 in |
Min. Practical Nominal Screw Lengths for Csk Heads (L) |
N/A 11/32 in |
