Email Us Today: 
Call Us Toll Free: 
Applicable to screw types as indicated by code symbols.
This type of recess consists of two intersecting slots with parallel sides converging to a slightly truncated apex at bottom of recess.
- Type AB thread forming.
- Types B and BP thread forming and Types BF and BT thread cutting.
- Type C thread forming and Types D, F, G, and T thread cutting.
This type of recess consists of two intersecting slots with parallel sides converging to a slightly truncated apex at bottom of recess.
Unit of Measure
Specifications
Product |
N/A Tapping Screws |
Unit of Measure |
N/A English |
Type |
N/A Type II |
Nominal Size or Basic Screw Dia. |
N/A 1/4 in |
Nominal Size or Basic Screw Dia. (Decimal) |
N/A 0.2500 in |
| Applicable to Screw Types1 |
N/A
1 3 4 |
Ref. Recess Dia. (M) |
N/A 0.304 in |
Ref. Recess Depth (T) |
N/A 0.169 in |
Ref. Recess Width (N) |
N/A 0.054 in |
Driver Size |
N/A Point Same on all Drivers |
Max. Recess Penetration Gaging Depth |
N/A 0.167 in |
Min. Recess Penetration Gaging Depth |
N/A 0.150 in |
- 1 1 = Circle, 3 = Triangle, 4 = Square
