Email Us Today: 
Call Us Toll Free: 
- Dimensional Conformance. Circular and circular clipped washers shall have the following characteristics inspected to ASME B18.18.2, to the inspection levels shown :
Inside diameter - Inspection Level B
Visual - Inspection Level C
If verifiable in-process inspection is used. - Nominal washer sizes are intended for use with comparable nominal diameters.
Quality Assurance
Unless otherwise specified, products shall be furnished in accordance with ASME B18.18.1 and ASME B18.18.2.
Unit of Measure
Specifications
Product |
N/A Structural Bolting |
Unit of Measure |
N/A English |
Basic Size or Nominal Washer Size |
N/A 1-1/8 in |
Nominal Washer Inside Dia. (A) |
N/A 1.250 in |
Tolerance for Inside Dia. (A) |
N/A +0.0313 in-0.000 in |
Nominal Outside Dia. (B) |
N/A 2.250 in |
Tolerance for Outside Dia. (B) |
N/A +0.0313 in-0.313 in |
Min. Thickness (C) |
N/A 0.136 in |
Max. Thickness (C) |
N/A 0.177 in |
Nominal Edge Distance (E) |
N/A 0.984 in |
