Email Us Today: 
Call Us Toll Free: 
- Top of Head. Top of head shall be full form and chamfered, with the diameter of chamfer circle being equal to the maximum width across flats within a tolerance of minus 15 percent.
- Wrenching Height, J. Wrenching height is a distance measured from the bearing surface up the side of the head at the corners. The width across corners shall be within specified limits for the full wrenching height.
- Bearing Surface. Bearing surface shall be flat and washer
Unit of Measure
Specifications
Product |
N/A Square and Hex Bolts and Screws |
Unit of Measure |
N/A English |
Nominal Size or Basic Product Diameter |
N/A 1-3/8 in |
Nominal Size or Basic Product Diameter (Decimal) |
N/A 1.3750 in |
Max. Body Diameter (E) |
N/A 1.3750 in |
Min. Body Diameter (E) |
N/A 1.3630 in |
Basic Width Across Flats (F) |
N/A 2-1/16 in |
Max. Width Across Flats (F) |
N/A 2.062 in |
Min. Width Across Flats (F) |
N/A 1.994 in |
Max. Width Across Corners (G) |
N/A 2.382 in |
Min. Width Across Corners (G) |
N/A 2.273 in |
Basic Head Height (H) |
N/A 27/32 in |
Max. Head Height (H) |
N/A 0.878 in |
Min. Head Height (H) |
N/A 0.810 in |
Min. Wrenching Height (J) |
N/A 0.569 in |
Max. Transition Thread Length (Y) |
N/A 0.833 in |
Max. Circular Runout of Bearing Surface FIM |
N/A 0.036 in |
