Email Us Today: 
Call Us Toll Free: 
- Applicable socket depths are specified in the dimensional tables and notes for the respective screw types.
- Where spline sockets are chamfered, the depth of chamfer shall not exceed 10 percent of the nominal socket size for sizes up to and including 0.060 in., and 7.5 percent for larger sizes. For chamfered sockets, it is permissible for the NOT GO socket gage to enter to the depth of chamfer as specified in Appendix.
- Where both six and four splines are available, six splines will be supplied unless four splines are ordered.
- Broach petals at the bottom of the socket are permissible.
Unit of Measure
Specifications
Product |
N/A Socket Screws |
Unit of Measure |
N/A English |
Nominal Socket and Key Size |
N/A 0.620 in |
Number of Teeth |
N/A 6 |
Max. Socket Major Dia. (M) |
N/A 0.631 in |
Min. Socket Major Dia. (M) |
N/A 0.627 in |
Max. Socket Minor Dia. (N) |
N/A 0.535 in |
Min. Socket Minor Dia. (N) |
N/A 0.531 in |
Max. Width of Tooth (P) |
N/A 0.149 in |
Min. Width of Tooth (P) |
N/A 0.145 in |
