Email Us Today: 
Call Us Toll Free: 
- Nominal Size. Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
- Length. The length of the screw shall be measured overall, parallel to the axis of the screw. The basic length dimension on the product shall be the nominal length expressed as a two-place decimal.
Unit of Measure
Specifications
Product |
N/A Socket Screws |
Unit of Measure |
N/A English |
Type |
N/A Half Dog Point |
Nominal Size or Basic Screw Diameter |
N/A No. 2 |
Nominal Size or Basic Screw Diameter (Decimal) |
N/A 0.0860 in |
Nom. Hexagon Socket Size Decimal (J) |
N/A 0.035 in |
Nom. No. of Splines |
N/A 4 6 |
Nom. Spline Socket Size Decimal (M) |
N/A 0.048 in |
Hex Socket TH Min. Key Engagement to Develop Functional Capability of Key (T) |
N/A 0.060 in |
Spline Socket Ts Min. Key Engagement to Develop Functional Capability of Key (T) |
N/A 0.040 in |
Max. Half Dog Point Diameter (P) |
N/A 0.057 in |
Min. Half Dog Point Diameter (P) |
N/A 0.053 in |
Max. Half Dog Point Length (Q) |
N/A 0.024 in |
Min. Half Dog Point Length (Q) |
N/A 0.020 in |
Half Dog Point Shortest Optimum Nominal Length to Which TH Applies (B) |
N/A 0.19 in |
Half Dog Point Shortest Optimum Nominal Length to Which Ts Applies (B1) |
N/A 0.19 in |
