Email Us Today: 
Call Us Toll Free: 
General Note:
This product is designed and recommended for light fastening applications such as guards, hinges, etc. It is not suggested for use in critical high strength applications where socket head cap screws should normally be used.
Notes:
This product is designed and recommended for light fastening applications such as guards, hinges, etc. It is not suggested for use in critical high strength applications where socket head cap screws should normally be used.
Notes:
- Nominal Size. Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
- Head Height. Tabulated head heights represent metal-to-metal measurements
Unit of Measure
Specifications
Product |
N/A Socket Screws |
Unit of Measure |
N/A English |
Nominal Size or Basic Screw Diameter |
N/A No. 6 |
Nominal Size or Basic Screw Diameter (Decimal) |
N/A 0.1380 in |
Max. Head Diameter (A) |
N/A 0.262 in |
Min. Head Diameter (A) |
N/A 0.250 in |
Max. Head Height (H) |
N/A 0.073 in |
Min. Head Height (H) |
N/A 0.063 in |
Ref. Head Side Height (S) |
N/A 0.015 in |
Nom. Spline Socket Size (M) |
N/A 0.096 in |
Nom. Hexagon Socket Size (J) |
N/A 5/64 in |
Nom. Hexagon Socket Size Decimal (J) |
N/A 0.078 in |
Min. Key Engagement (T) |
N/A 0.044 in |
Max. Fillet Transition Diameter (F) |
N/A 0.158 in |
Min. Fillet Transition Diameter (F) |
N/A 0.148 in |
Nom. Maximum Standard Length (L) |
N/A 0.63 in |
