Email Us Today: 
Call Us Toll Free: 
General Note:
This product is designed and recommended for light fastening applications such as guards, hinges, etc. It is not suggested for use in critical high strength applications where socket head cap screws should normally be used.
Notes:
This product is designed and recommended for light fastening applications such as guards, hinges, etc. It is not suggested for use in critical high strength applications where socket head cap screws should normally be used.
Notes:
- Nominal Size. Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
- Head Height. Tabulated head heights represent metal-to-metal measurements
Unit of Measure
Specifications
Product |
N/A Socket Screws |
Unit of Measure |
N/A English |
Nominal Size or Basic Screw Diameter |
N/A 5/8 in |
Nominal Size or Basic Screw Diameter (Decimal) |
N/A 0.6250 in |
Max. Head Diameter (A) |
N/A 1.000 in |
Min. Head Diameter (A) |
N/A 0.970 in |
Max. Head Height (H) |
N/A 0.331 in |
Min. Head Height (H) |
N/A 0.311 in |
Ref. Head Side Height (S) |
N/A 0.062 in |
Nom. Spline Socket Size (M) |
N/A 0.454 in |
Nom. Hexagon Socket Size (J) |
N/A 3/8 in |
Nom. Hexagon Socket Size Decimal (J) |
N/A 0.375 in |
Min. Key Engagement (T) |
N/A 0.210 in |
Max. Fillet Transition Diameter (F) |
N/A 0.685 in |
Min. Fillet Transition Diameter (F) |
N/A 0.665 in |
Nom. Maximum Standard Length (L) |
N/A 2.00 in |
