Email Us Today: 
Call Us Toll Free: 
General Note:
This product is designed and recommended for light fastening applications such as guards, hinges, etc. It is not suggested for use in critical high strength applications where socket head cap screws should normally be used.
Notes:
This product is designed and recommended for light fastening applications such as guards, hinges, etc. It is not suggested for use in critical high strength applications where socket head cap screws should normally be used.
Notes:
- Nominal Size. Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
- Head Height. Tabulated head heights represent metal-to-metal measurements
Unit of Measure
Specifications
Product |
N/A Socket Screws |
Unit of Measure |
N/A English |
Nominal Size or Basic Screw Diameter |
N/A 5/16 in |
Nominal Size or Basic Screw Diameter (Decimal) |
N/A 0.3125 in |
Max. Head Diameter (A) |
N/A 0.547 in |
Min. Head Diameter (A) |
N/A 0.527 in |
Max. Head Height (H) |
N/A 0.166 in |
Min. Head Height (H) |
N/A 0.152 in |
Ref. Head Side Height (S) |
N/A 0.031 in |
Nom. Spline Socket Size (M) |
N/A 0.216 in |
Nom. Hexagon Socket Size (J) |
N/A 3/16 in |
Nom. Hexagon Socket Size Decimal (J) |
N/A 0.188 in |
Min. Key Engagement (T) |
N/A 0.105 in |
Max. Fillet Transition Diameter (F) |
N/A 0.353 in |
Min. Fillet Transition Diameter (F) |
N/A 0.343 in |
Nom. Maximum Standard Length (L) |
N/A 1.00 in |
