Email Us Today: 
Call Us Toll Free: 
General Note:
This product is designed and recommended for light fastening applications such as guards, hinges, etc. It is not suggested for use in critical high strength applications where socket head cap screws should normally be used.
Notes:
This product is designed and recommended for light fastening applications such as guards, hinges, etc. It is not suggested for use in critical high strength applications where socket head cap screws should normally be used.
Notes:
- Nominal Size. Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
- Head Height. Tabulated head heights represent metal-to-metal measurements
Unit of Measure
Specifications
Product |
N/A Socket Screws |
Unit of Measure |
N/A English |
Nominal Size or Basic Screw Diameter |
N/A 1/4 in |
Nominal Size or Basic Screw Diameter (Decimal) |
N/A 0.2500 in |
Max. Head Diameter (A) |
N/A 0.437 in |
Min. Head Diameter (A) |
N/A 0.419 in |
Max. Head Height (H) |
N/A 0.132 in |
Min. Head Height (H) |
N/A 0.122 in |
Ref. Head Side Height (S) |
N/A 0.031 in |
Nom. Spline Socket Size (M) |
N/A 0.183 in |
Nom. Hexagon Socket Size (J) |
N/A 5/32 in |
Nom. Hexagon Socket Size Decimal (J) |
N/A 0.156 in |
Min. Key Engagement (T) |
N/A 0.087 in |
Max. Fillet Transition Diameter (F) |
N/A 0.290 in |
Min. Fillet Transition Diameter (F) |
N/A 0.280 in |
Nom. Maximum Standard Length (L) |
N/A 1.00 in |
