Email Us Today: 
Call Us Toll Free: 
General Note:
This product is designed and recommended for light fastening applications such as guards, hinges, etc. It is not suggested for use in critical high strength applications where socket head cap screws should normally be used.
Notes:
This product is designed and recommended for light fastening applications such as guards, hinges, etc. It is not suggested for use in critical high strength applications where socket head cap screws should normally be used.
Notes:
- Nominal Size. Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
- Head Height. Tabulated head heights represent metal-to-metal measurements
Unit of Measure
Specifications
Product |
N/A Socket Screws |
Unit of Measure |
N/A English |
Nominal Size or Basic Screw Diameter |
N/A No. 10 |
Nominal Size or Basic Screw Diameter (Decimal) |
N/A 0.1900 in |
Max. Head Diameter (A) |
N/A 0.361 in |
Min. Head Diameter (A) |
N/A 0.347 in |
Max. Head Height (H) |
N/A 0.101 in |
Min. Head Height (H) |
N/A 0.091 in |
Ref. Head Side Height (S) |
N/A 0.020 in |
Nom. Spline Socket Size (M) |
N/A 0.145 in |
Nom. Hexagon Socket Size (J) |
N/A 1/8 in |
Nom. Hexagon Socket Size Decimal (J) |
N/A 0.125 in |
Min. Key Engagement (T) |
N/A 0.070 in |
Max. Fillet Transition Diameter (F) |
N/A 0.220 in |
Min. Fillet Transition Diameter (F) |
N/A 0.210 in |
Nom. Maximum Standard Length (L) |
N/A 1.00 in |
