Email Us Today: 
Call Us Toll Free: 
- Hexagon machine screw nuts shall have tops flat with chamfered corners. Diameter of top circle shall be equal to the maximum width across flats within a tolerance of minus 15 percent. The bearing surface shall be perpendicular to the axis of the threaded hole pitch cylinder within a tolerance of 4 deg.
- Bottoms of hexagon machine screw nuts are normally flat, but for special purposes may be chamfered, if so specified by purchaser.
- Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
Unit of Measure
Specifications
Product |
N/A Machine Screw Nuts |
Unit of Measure |
N/A English |
Nominal Size or Basic Thread Dia. |
N/A No. 3 |
Nominal Size or Basic Thread Dia. (Decimal) |
N/A 0.0990 in |
Basic Width Across Flats (F) |
N/A 3/16 in |
Max. Width Across Flats (F) |
N/A 0.188 in |
Min. Width Across Flats (F) |
N/A 0.180 in |
Max. Width Across Corners (G1) |
N/A 0.217 in |
Min. Width Across Corners (G1) |
N/A 0.205 in |
Max. Thickness (H) |
N/A 0.066 in |
Min. Thickness (H) |
N/A 0.057 in |
