Cross Recessed Flat Countersunk Head Tapping Screws
Tapping Screws
- Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
- Head dimensions not shown are the same as those of slotted heads
- Not practical to gage sizes No. 0 and No. 1.
Unit of Measure
Items |
/Asset/a1111.jpg CRFCHTSI00600XXX Type I Cross Recessed Flat Countersunk Head Tapping Screw, 0.0600" Nominal Dia. |
/Asset/a1111.jpg CRFCHTSI00730XXX Type I Cross Recessed Flat Countersunk Head Tapping Screw, 0.0730" Nominal Dia. |
/Asset/a1111.jpg CRFCHTSI00860XXX Type I Cross Recessed Flat Countersunk Head Tapping Screw, 0.0860" Nominal Dia. |
/Asset/a1111.jpg CRFCHTSI00990XXX Type I Cross Recessed Flat Countersunk Head Tapping Screw, 0.0990" Nominal Dia. |
/Asset/a1111.jpg CRFCHTSI01120XXX Type I Cross Recessed Flat Countersunk Head Tapping Screw, 0.1120" Nominal Dia. |
|||||
Manufacturer | N/A Industrial Fasteners Institute | |||||||||
Product | N/A Tapping Screws | |||||||||
Codes and Standards | N/A Abstract of ASME B18.6.4 1998 | |||||||||
Unit of Measure | N/A English | |||||||||
Type | N/A Type I | |||||||||
Nominal Size or Basic Screw Dia. | N/A No. 0 | N/A No. 1 | N/A No. 2 | N/A No. 3 | N/A No. 4 | |||||
Nominal Size or Basic Screw Dia. (Decimal) | N/A 0.0600 in | N/A 0.0730 in | N/A 0.0860 in | N/A 0.0990 in | N/A 0.1120 in | |||||
Ref. Recess Dia. (M) | N/A 0.062 in | N/A 0.070 in | N/A 0.096 in | N/A 0.100 in | N/A 0.122 in | |||||
Ref. Recess Depth (T) | N/A 0.035 in | N/A 0.043 in | N/A 0.055 in | N/A 0.060 in | N/A 0.081 in | |||||
Ref. Recess Width (N) | N/A 0.014 in | N/A 0.015 in | N/A 0.017 in | N/A 0.018 in | N/A 0.018 in | |||||
Driver Size | N/A 0 | N/A 0 | N/A 1 | N/A 1 | N/A 1 | |||||
Max. Recess Penetration Gaging Depth | N/A 0.036 in | N/A 0.044 in | N/A 0.056 in | N/A 0.061 in | N/A 0.082 in | |||||
Min. Recess Penetration Gaging Depth | N/A 0.020 in | N/A 0.028 in | N/A 0.040 in | N/A 0.045 in | N/A 0.066 in | |||||
|