Shear Connector Stud are designed to effectively tie the concrete to the steel beams and to resist shear loadings between the concrete slab and steel beam in composite construction. All orders for studs include required ferrules.

Length : Length is before weld. Studs will be approximately 3/16" shorter after welding. Lengths for shear connector studs are generally set by governing specifications. Consult your SWA representative for other lengths available for specific applications.

Material : Low Carbon Steel

All S.W.A. shear connector studs meet AWS specifications. Test reports available on request.

Stainless Steel : SC studs are also available in stainless steel. Type 304 Other grades of stainless steel (except Type 303) available when required.
Boxed in 3/8 keg cartons.

For welding to fillet or heel of angle consult SWA representative for ferrule part number.
Request Information
Unit of Measure
Items
Shear Connector Stud (SC)

Shear Connector Stud (SC), 3-3/16" Long
Shear Connector Stud (SC)

Shear Connector Stud (SC), 3-3/8" Long
Shear Connector Stud (SC)

Shear Connector Stud (SC), 3-11/16" Long
Shear Connector Stud (SC)

Shear Connector Stud (SC), 3-7/8" Long
Shear Connector Stud (SC)

Shear Connector Stud (SC), 4-3/16" Long
Manufacturer N/A Stud Welding Products, Inc.
Product N/A Connector Studs
Standard Length N/A 3-3/16 in N/A 3-3/8 in N/A 3-11/16 in N/A 3-7/8 in N/A 4-3/16 in
Weight per M Pieces N/A 486 lbs N/A 509 lbs N/A 548 lbs N/A 572 lbs N/A 611 lbs
Pieces per Box N/A 200 N/A 200 N/A 150 N/A 150 N/A 150
Weight per Box N/A 98 lbs N/A 102 lbs N/A 82 lbs N/A 86 lbs N/A 92 lbs
D N/A 3/4 in
A N/A 1-1/4 in
H N/A 3/8 in
No. N/A FF-075 (Flat Surface) FW-075 (Weld Through Deck)
D N/A 1.215 in
B N/A 1.030 in
F N/A 0.469 in
M N/A 0.656 in
Material N/A Low Carbon Steel (C-1010) Low Carbon Steel (C-1020) Stainless Steel (ASTM-A108) Stainless Steel (AWSD1.1)
Min. Tensile N/A 60000 psi
Min. Reduction in Area N/A 50%
Search Catalog: GO
Use trailing wildcard (*) for broader results.