• Dimensional Conformance. Circular and circular clipped washers shall have the following characteristics inspected to ASME B18.18.2, to the inspection levels shown :
    Inside diameter - Inspection Level B
    Visual - Inspection Level C
    If verifiable in-process inspection is used.
  • Nominal washer sizes are intended for use with comparable nominal diameters.

    Quality Assurance

    Unless otherwise specified, products shall be furnished in accordance with ASME B18.18.1 and ASME B18.18.2.
Request Information
Unit of Measure
Items
Hardened Steel Circular and Circular Clipped Washers 1

Hardened Steel Circular and Circular Clipped Washer, with 1.063" Nominal O.D
Hardened Steel Circular and Circular Clipped Washers 1

Hardened Steel Circular and Circular Clipped Washer, with 1.313" Nominal O.D
Hardened Steel Circular and Circular Clipped Washers 1

Hardened Steel Circular and Circular Clipped Washer, with 1.469" Nominal O.D
Hardened Steel Circular and Circular Clipped Washers 1

Hardened Steel Circular and Circular Clipped Washer, with 1.750" Nominal O.D
Hardened Steel Circular and Circular Clipped Washers 1

Hardened Steel Circular and Circular Clipped Washer, with 2.000" Nominal O.D
Manufacturer N/A Industrial Fasteners Institute
Product N/A Structural Bolting
Codes and Standards N/A ASME Draft Revision B18.2.6 2003
Unit of Measure N/A English
Basic Size or Nominal Washer Size N/A 1/2 in N/A 5/8 in N/A 3/4 in N/A 7/8 in N/A 1 in
Nominal Washer Inside Dia. (A) N/A 0.531 in N/A 0.688 in N/A 0.813 in N/A 0.938 in N/A 1.125 in
Tolerance for Inside Dia. (A) N/A +0.0313 in-0.000 in
Nominal Outside Dia. (B) N/A 1.063 in N/A 1.313 in N/A 1.469 in N/A 1.750 in N/A 2.000 in
Tolerance for Outside Dia. (B) N/A +0.0313 in-0.313 in
Min. Thickness (C) N/A 0.097 in N/A 0.122 in N/A 0.122 in N/A 0.136 in N/A 0.136 in
Max. Thickness (C) N/A 0.177 in
Nominal Edge Distance (E) N/A 0.438 in N/A 0.547 in N/A 0.656 in N/A 0.766 in N/A 0.875 in
Search Catalog: GO
Use trailing wildcard (*) for broader results.