• Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
  • Applicable to screw types as indicated by code symbols.
    Type AB thread forming.
    Types B and BP thread forming and Types BF and BT thread cutting.
    Type C thread forming, Appendix; and Types D, F, G, and T thread cutting.
  • No tolerance for gaging diameter is given. If the gaging diameter of the gage used differs from tabulated value, the protrusion will be affected accordingly and the proper protrusion values must be recalculated using the formulas.
  • Short screws are those threaded full length.
This type of recess has a large center opening, tapered wings, and blunt bottom, with all edges relieved or rounded.
26 - 32 of 32 | Results Per Page | View | Unit of Measure
1 2 

Item #

Description

Type

Nominal Size or Basic Screw Dia.

Head Size

Ref. (M)

Ref. (T)

Ref. (N)

N/A Type I Short Screw with 0.214" Recess Dia. N/A Type I Short Screws N/A No. 14 N/A 10 N/A 0.202 in N/A 0.125 in N/A 0.033 in
N/A Type I Short Screw with 0.264" Recess Dia. N/A Type I Short Screws N/A No. 14 N/A 12 N/A 0.264 in N/A 0.140 in N/A 0.038 in
N/A Type I Short Screw with 0.214" Recess Dia. N/A Type I Short Screws N/A 1/4 in N/A 10 N/A 0.202 in N/A 0.125 in N/A 0.033 in
N/A Type I Short Screw with 0.264" Recess Dia. N/A Type I Short Screws N/A 1/4 in N/A 12 N/A 0.264 in N/A 0.140 in N/A 0.038 in
N/A Type I Short Screw with 0.264" Recess Dia. N/A Type I Short Screws N/A 5/16 in N/A 12 N/A 0.264 in N/A 0.140 in N/A 0.038 in
N/A Type I Short Screw with 0.284" Recess Dia. N/A Type I Short Screws N/A 5/16 in N/A 1/4 in N/A 0.284 in N/A 0.160 in N/A 0.040 in
N/A Type I Short Screw with 0.384" Recess Dia. N/A Type I Short Screws N/A 3/8 in N/A 5/16 in N/A 0.384 in N/A 0.226 in N/A 0.065 in
26 - 32 of 32 | Results Per Page | View | Unit of Measure
1 2 
Use trailing wildcard (*) for broader results.