EmailEmail Us Today: info@salessystemsltd.comPhoneCall Us Toll Free: 800.368.3711
Reference Guide Only. Not Actual Inventory.
Sales Systems Limited Products and Services > Fasteners Reference Guide > Nuts > Structural Bolting [Nuts] > Hex Thick Nuts > View Items  
Download PDF Download PDF         Email Email This Page     Save To Favorites Save To Favorites

Hex Thick Nuts

 
Check up to five results to perform an action.

  • Tops and Bearing Surface of Nuts. Nuts in sizes 5/8 in. nominal size and smaller shall be double chamfered. Larger size nuts shall be double chamfered or have washer faced bearing surface and chamfered top.
    The diameter of chamfer circle on double chamfered nuts and diameter of washer face shall be within the limits of the maximum width across flats and 95 percent of the minimum width across flats.
    The tops of washer faced nuts shall be flat and the diameter of chamfer circle shall be equal to the maximum width across flats within a tolerance of minus 15 percent. The length of chamfer at hex corners shall be from 5 to 15 percent of the basic thread diameter. The surface of chamfer may be slightly convex or rounded.
    Bearing surface shall be flat and perpendicular to the axis of the threaded hole within the FIM limits specified for the respective strength level.
  • Width Across Flats. Maximum width across flats shall not be exceeded. No transverse section through the nut between 25 and 75 percent of the actual nut thickness as measured from the bearing surface shall be less than the minimum width across flats. For milled-from-bar nuts, see statement in General Data pertaining to the nominal bar size to be used.
  • Corner Fill. A rounding or lack of fill at junction of hex corners with chamfer shall be permissible provided the minimum width across corners is within specified limits at and beyond a distance equal to 17.5 percent of the basic thread diameter from the chamfered faces.
  • True Position of Tapped Hole. The axis of tapped hole shall be located at true position with respect to the axis of nut body within a tolerance zone having a diameter equivalent to 4 percent of the maximum width across flats, regardless of feature size.



Compare Items
   
  Results 1 - 14 of 14 1 

Item #

Description

Nominal Size or Basic Major Dia. of Thread

Basic (F)

Max. (G)

Basic (H)

Max. Runout of Bearing Face, FIM (Specified Proof Load Up to 150,000 psi)
HTN02500XXX Hex Thick Nut, 1/4" Nominal Dia. 1/4 in 7/16 in 0.505 in 9/32 in 0.015 in
HTN03125XXX Hex Thick Nut, 5/16" Nominal Dia. 5/16 in 1/2 in 0.577 in 21/64 in 0.016 in
HTN03750XXX Hex Thick Nut, 3/8" Nominal Dia. 3/8 in 9/16 in 0.650 in 13/32 in 0.017 in
HTN04375XXX Hex Thick Nut, 7/16" Nominal Dia. 7/16 in 11/16 in 0.794 in 29/64 in 0.018 in
HTN05000XXX Hex Thick Nut, 1/2" Nominal Dia. 1/2 in 3/4 in 0.866 in 9/16 in 0.019 in
HTN05625XXX Hex Thick Nut, 9/16" Nominal Dia. 9/16 in 7/8 in 1.010 in 39/64 in 0.020 in
HTN06250XXX Hex Thick Nut, 5/8" Nominal Dia. 5/8 in 15/16 in 1.083 in 23/32 in 0.021 in
HTN07500XXX Hex Thick Nut, 3/4" Nominal Dia. 3/4 in 1-1/8 in 1.299 in 13/16 in 0.023 in
HTN08750XXX Hex Thick Nut, 7/8" Nominal Dia. 7/8 in 1-5/16 in 1.516 in 29/32 in 0.025 in
HTN10000XXX Hex Thick Nut, 1" Nominal Dia. 1 in 1-1/2 in 1.732 in 1 in 0.027 in
HTN11250XXX Hex Thick Nut, 1-1/8" Nominal Dia. 1-1/8 in 1-11/16 in 1.949 in 1-5/32 in 0.030 in
HTN12500XXX Hex Thick Nut, 1-1/4" Nominal Dia. 1-1/4 in 1-7/8 in 2.165 in 1-1/4 in 0.033 in
HTN13750XXX Hex Thick Nut, 1-3/8" Nominal Dia. 1-3/8 in 2-1/16 in 2.382 in 1-3/8 in 0.036 in
HTN15000XXX Hex Thick Nut, 1-1/2" Nominal Dia. 1-1/2 in 2-1/4 in 2.598 in 1-1/2 in 0.039 in
  Results 1 - 14 of 14 1 
Distributor of Industry Standard and Military Specification Threaded Fasteners