Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
26 - 48 of 48 | Results Per Page | View | Unit of Measure
1 2 

Item #

Description

Type

Nominal Size or Basic Screw Dia.

Ref. (M)

Ref. (T)

Ref. (N)

Driver Size

N/A Type IA Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.198" Recess Dia. N/A Type IA N/A No. 14 N/A 0.198 in N/A 0.127 in N/A 0.041 in N/A 2
N/A Type IA Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.262" Recess Dia. N/A Type IA N/A No. 14 N/A 0.262 in N/A 0.149 in N/A 0.056 in N/A 3
N/A Type IA Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.198" Recess Dia. N/A Type IA N/A 1/4 in N/A 0.198 in N/A 0.127 in N/A 0.041 in N/A 2
N/A Type IA Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.262" Recess Dia. N/A Type IA N/A 1/4 in N/A 0.262 in N/A 0.149 in N/A 0.056 in N/A 3
N/A Type IA Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.262" Recess Dia. N/A Type IA N/A 5/16 in N/A 0.262 in N/A 0.149 in N/A 0.056 in N/A 3
N/A Type IA Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.276" Recess Dia. N/A Type IA N/A 5/16 in N/A 0.276 in N/A 0.164 in N/A 0.057 in N/A 3
N/A Type IA Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.358" Recess Dia. N/A Type IA N/A 3/8 in N/A 0.358 in N/A 0.211 in N/A 0.086 in N/A 4
N/A Type II Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.100" Recess Dia. N/A Type II N/A No. 4 N/A 0.133 in N/A 0.072 in N/A 0.030 in N/A Point Same on all Drivers
N/A Type II Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.122" Recess Dia. N/A Type II N/A No. 5 N/A 0.151 in N/A 0.082 in N/A 0.032 in N/A Point Same on all Drivers
N/A Type II Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.122" Recess Dia. N/A Type II N/A No. 6 N/A 0.151 in N/A 0.082 in N/A 0.032 in N/A Point Same on all Drivers
N/A Type II Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.148" Recess Dia. N/A Type II N/A No. 6 N/A 0.169 in N/A 0.094 in N/A 0.035 in N/A Point Same on all Drivers
N/A Type II Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.158" Recess Dia. N/A Type II N/A No. 8 N/A 0.169 in N/A 0.094 in N/A 0.035 in N/A Point Same on all Drivers
N/A Type II Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.176" Recess Dia. N/A Type II N/A No. 8 N/A 0.188 in N/A 0.106 in N/A 0.038 in N/A Point Same on all Drivers
N/A Type II Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.182" Recess Dia. N/A Type II N/A No. 10 N/A 0.224 in N/A 0.124 in N/A 0.043 in N/A Point Same on all Drivers
N/A Type II Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.192" Recess Dia. N/A Type II N/A No. 12 N/A 0.224 in N/A 0.124 in N/A 0.043 in N/A Point Same on all Drivers
N/A Type II Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.198" Recess Dia. N/A Type II N/A No. 12 N/A 0.260 in N/A 0.148 in N/A 0.048 in N/A Point Same on all Drivers
N/A Type II Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.198" Recess Dia. N/A Type II N/A No. 14 N/A 0.260 in N/A 0.148 in N/A 0.048 in N/A Point Same on all Drivers
N/A Type II Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.262" Recess Dia. N/A Type II N/A No. 14 N/A 0.297 in N/A 0.172 in N/A 0.054 in N/A Point Same on all Drivers
N/A Type II Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.198" Recess Dia. N/A Type II N/A 1/4 in N/A 0.260 in N/A 0.148 in N/A 0.048 in N/A Point Same on all Drivers
N/A Type II Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.262" Recess Dia. N/A Type II N/A 1/4 in N/A 0.297 in N/A 0.172 in N/A 0.054 in N/A Point Same on all Drivers
N/A Type II Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.262" Recess Dia. N/A Type II N/A 5/16 in N/A 0.297 in N/A 0.172 in N/A 0.054 in N/A Point Same on all Drivers
N/A Type II Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.276" Recess Dia. N/A Type II N/A 5/16 in N/A 0.344 in N/A 0.195 in N/A 0.061 in N/A Point Same on all Drivers
N/A Type II Cross Recess Dimensions for Flat Countersunk Trim Head Tapping Screw, with 0.358" Recess Dia. N/A Type II N/A 3/8 in N/A 0.432 in N/A 0.252 in N/A 0.074 in N/A Point Same on all Drivers
26 - 48 of 48 | Results Per Page | View | Unit of Measure
1 2 
Use trailing wildcard (*) for broader results.