• Hexagon machine screw nuts shall have tops flat with chamfered corners. Diameter of top circle shall be equal to the maximum width across flats within a tolerance of minus 15 percent. The bearing surface shall be perpendicular to the axis of the threaded hole pitch cylinder within a tolerance of 4 deg.
  • Bottoms of hexagon machine screw nuts are normally flat, but for special purposes may be chamfered, if so specified by purchaser.
  • Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
1 - 13 of 13 | Results Per Page | View | Unit of Measure
1 

Item #

Description

Nominal Size or Basic Thread Dia.

Basic (F)

Max. (G1)

Max. (H)

N/A Hex Machine Screw Nut, with 0.180" Width Across Corner N/A No. 0 N/A 5/32 in N/A 0.180 in N/A 0.050 in
N/A Hex Machine Screw Nut, with 0.180" Width Across Corner N/A No. 1 N/A 5/32 in N/A 0.180 in N/A 0.050 in
N/A Hex Machine Screw Nut, with 0.217" Width Across Corner N/A No. 2 N/A 3/16 in N/A 0.217 in N/A 0.066 in
N/A Hex Machine Screw Nut, with 0.217" Width Across Corner N/A No. 3 N/A 3/16 in N/A 0.217 in N/A 0.066 in
N/A Hex Machine Screw Nut, with 0.289" Width Across Corner N/A No. 4 N/A 1/4 in N/A 0.289 in N/A 0.098 in
N/A Hex Machine Screw Nut, with 0.361" Width Across Corner N/A No. 5 N/A 5/16 in N/A 0.361 in N/A 0.114 in
N/A Hex Machine Screw Nut, with 0.361" Width Across Corner N/A No. 6 N/A 5/16 in N/A 0.361 in N/A 0.114 in
N/A Hex Machine Screw Nut, with 0.397" Width Across Corner N/A No. 8 N/A 11/32 in N/A 0.397 in N/A 0.130 in
N/A Hex Machine Screw Nut, with 0.433" Width Across Corner N/A No. 10 N/A 3/8 in N/A 0.433 in N/A 0.130 in
N/A Hex Machine Screw Nut, with 0.505" Width Across Corner N/A No. 12 N/A 7/16 in N/A 0.505 in N/A 0.161 in
N/A Hex Machine Screw Nut, with 0.505" Width Across Corner N/A 1/4 in N/A 7/16 in N/A 0.505 in N/A 0.193 in
N/A Hex Machine Screw Nut, with 0.650" Width Across Corner N/A 5/16 in N/A 9/16 in N/A 0.650 in N/A 0.225 in
N/A Hex Machine Screw Nut, with 0.722" Width Across Corner N/A 3/8 in N/A 5/8 in N/A 0.722 in N/A 0.257 in
1 - 13 of 13 | Results Per Page | View | Unit of Measure
1 
Use trailing wildcard (*) for broader results.