• Suggested angle or mating component is 80-82 deg.
  • Washer sizes are intended for use with comparable nominal screw sizes.
  • For reference purposes only; not subject to inspection.
Standard Stock Material
  • Carbon Steel
  • Stainless Steel
  • Phosphorus Bronze
1 - 11 of 11 | Results Per Page | View | Unit of Measure
1 

Item #

Description

Nominal Washer Size

Max. (A)

Max. (B)

Max. (C)

Max. (D)

N/A Countersunk External Tooth Lock Washer, 0.123" I.D. N/A No. 4 N/A 0.123 in N/A 0.213 in N/A 0.019 in N/A 0.065 in
N/A Countersunk External Tooth Lock Washer, 0.150" I.D. N/A No. 6 N/A 0.150 in N/A 0.289 in N/A 0.021 in N/A 0.092 in
N/A Countersunk External Tooth Lock Washer, 0.177" I.D. N/A No. 8 N/A 0.177 in N/A 0.322 in N/A 0.021 in N/A 0.099 in
N/A Countersunk External Tooth Lock Washer, 0.205" I.D. N/A No. 10 N/A 0.205 in N/A 0.354 in N/A 0.025 in N/A 0.105 in
N/A Countersunk External Tooth Lock Washer, 0.231" I.D. N/A No. 12 N/A 0.231 in N/A 0.421 in N/A 0.025 in N/A 0.128 in
N/A Countersunk External Tooth Lock Washer, 0.267" I.D. N/A 1/4 in N/A 0.267 in N/A 0.454 in N/A 0.025 in N/A 0.128 in
N/A Countersunk External Tooth Lock Washer, 0.287" I.D. N/A No. 16 N/A 0.287 in N/A 0.505 in N/A 0.028 in N/A 0.147 in
N/A Countersunk External Tooth Lock Washer, 0.333" I.D. N/A 5/16 in N/A 0.333 in N/A 0.599 in N/A 0.028 in N/A 0.192 in
N/A Countersunk External Tooth Lock Washer, 0.398" I.D. N/A 3/8 in N/A 0.398 in N/A 0.765 in N/A 0.034 in N/A 0.255 in
N/A Countersunk External Tooth Lock Washer, 0.463" I.D. N/A 7/16 in N/A 0.463 in N/A 0.867 in N/A 0.045 in N/A 0.27 in
N/A Countersunk External Tooth Lock Washer, 0.529" I.D. N/A 1/2 in N/A 0.529 in N/A 0.976 in N/A 0.045 in N/A 0.304 in
1 - 11 of 11 | Results Per Page | View | Unit of Measure
1 
Use trailing wildcard (*) for broader results.