• Tops of Nuts. Tops of nuts shall be flat and chamfered, the length of chamfer at hex corners shall be from 5 to 15 percent of the basic thread size. The surface may be slightly convex or rounded.
  • Bearing Surface. Bearing surface shall be at right angle to axis of the threaded hole within a tolerance of 2 degrees; therefore, the maximum total angularity of bearing surface would equal the tangent of specified angle times the diameter of the flange.
  • Concentricity of Tapped Hole. Axis of tapped hole shall be concentric with axis of nut body within a tolerance equal to 3 percent (6 percent FIM) of the maximum width across flats.
  • Countersink. Tapped hole shall be countersunk on the bearing face and may be countersunk on the top. The maximum countersunk diameter shall be the thread basic (nominal) major diameter plus 0.030 in. for 3/8 in. nominal size nuts and smaller, and 1.08 times the basic major diameter for nuts larger than 3/8 in. No part of the threaded portion shall project beyond the bearing surface.
  • Threads. Threads shall be Unified coarse or fine thread series (UNC or UNF series), Class 2B, in accordance with ASME B1.1.
  • Material. Unless otherwise specified, chemical and mechanical properties of steel nuts shall conform with ASTM A563, Grade A, or SAE J995, Grade 2. Nuts of other materials such as corrosion resistant (stainless) steel, brass, bronze and aluminum alloys shall have properties as agreed between the manufacturer and purchaser. The properties for nuts of several grades of corrosion resistant steel alloys are covered in ASTM F594, and of several nonferrous materials in ASTM F467.
  • Nominal Size. Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1 

Item #

Description

Nominal Size or Basic Major Dia. of Thread

Max. (F)

Max. (G)

Max. (B)

Max. (H)

Min. (J)

Sort by
N/A Hex Flange Nut, 0.1380" Nominal Dia. N/A No. 6 N/A 0.312 in N/A 0.361 in N/A 0.422 in N/A 0.171 in N/A 0.10 in
N/A Hex Flange Nut, 0.1640" Nominal Dia. N/A No. 8 N/A 0.344 in N/A 0.397 in N/A 0.469 in N/A 0.203 in N/A 0.13 in
N/A Hex Flange Nut, 0.1900" Nominal Dia. N/A No. 10 N/A 0.375 in N/A 0.433 in N/A 0.500 in N/A 0.219 in N/A 0.13 in
N/A Hex Flange Nut, 0.2160" Nominal Dia. N/A No. 12 N/A 0.438 in N/A 0.505 in N/A 0.594 in N/A 0.236 in N/A 0.140 in
N/A Hex Flange Nut, 0.2500" Nominal Dia. N/A 1/4 in N/A 0.438 in N/A 0.505 in N/A 0.594 in N/A 0.236 in N/A 0.140 in
N/A Hex Flange Nut, 0.3125" Nominal Dia. N/A 5/16 in N/A 0.500 in N/A 0.577 in N/A 0.680 in N/A 0.283 in N/A 0.17 in
N/A Hex Flange Nut, 0.3750" Nominal Dia. N/A 3/8 in N/A 0.562 in N/A 0.650 in N/A 0.750 in N/A 0.347 in N/A 0.23 in
N/A Hex Flange Nut, 0.4375" Nominal Dia. N/A 7/16 in N/A 0.688 in N/A 0.794 in N/A 0.937 in N/A 0.395 in N/A 0.26 in
N/A Hex Flange Nut, 0.5000" Nominal Dia. N/A 1/2 in N/A 0.750 in N/A 0.866 in N/A 1.031 in N/A 0.458 in N/A 0.31 in
N/A Hex Flange Nut, 0.5625" Nominal Dia. N/A 9/16 in N/A 0.875 in N/A 1.010 in N/A 1.188 in N/A 0.506 in N/A 0.35 in
N/A Hex Flange Nut, 0.6250" Nominal Dia. N/A 5/8 in N/A 0.938 in N/A 1.083 in N/A 1.281 in N/A 0.569 in N/A 0.40 in
N/A Hex Flange Nut, 0.7500" Nominal Dia. N/A 3/4 in N/A 1.125 in N/A 1.299 in N/A 1.500 in N/A 0.675 in N/A 0.46 in
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1 
Use trailing wildcard (*) for broader results.