• Nominal Size. Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
  • Length. The length of the screw shall be measured overall, parallel to the axis of the screw. The basic length dimension on the product shall be the nominal length expressed as a two-place decimal.
Unit of Measure

Manufacturer

Manufacturer

N/A Industrial Fasteners Institute

Specifications

Product

N/A Socket Screws

Unit of Measure

N/A English

Type

N/A Oval Point

Nominal Size or Basic Screw Diameter

N/A No. 10

Nominal Size or Basic Screw Diameter (Decimal)

N/A 0.1900 in

Nom. Hexagon Socket Size (J)

N/A 3/32 in

Nom. Hexagon Socket Size Decimal (J)

N/A 0.094 in

Nom. No. of Splines

N/A 4

Nom. Spline Socket Size Decimal (M)

N/A 0.111 in

Hex Socket TH Min. Key Engagement to Develop Functional Capability of Key (T)

N/A 0.100 in

Spline Socket Ts Min. Key Engagement to Develop Functional Capability of Key (T)

N/A 0.080 in

Basic Oval Point Radius (R)

N/A 0.142 in

90 Deg. Cone and Oval Points Shortest Optimum Nominal Length to Which TH Applies (B)

N/A 0.25 in

90 Deg. Cone and Oval Points Shortest Optimum Nominal Length to Which Ts Applies (B1)

N/A 0.25 in

Codes and Standards

Codes and Standards

N/A ASME B18.3 2002
Use trailing wildcard (*) for broader results.