Email Us Today: 
Call Us Toll Free: 
General Note:
This product is designed and recommended for light fastening applications such as guards, hinges, etc. It is not suggested for use in critical high strength applications where socket head cap screws should normally be used.
Notes:
This product is designed and recommended for light fastening applications such as guards, hinges, etc. It is not suggested for use in critical high strength applications where socket head cap screws should normally be used.
Notes:
- Nominal Size. Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
- Head Height. Tabulated head heights represent metal-to-metal measurements
Unit of Measure
Specifications
Product |
N/A Socket Screws |
Unit of Measure |
N/A English |
Nominal Size or Basic Screw Diameter |
N/A No. 3 |
Nominal Size or Basic Screw Diameter (Decimal) |
N/A 0.0990 in |
Max. Head Diameter (A) |
N/A 0.188 in |
Min. Head Diameter (A) |
N/A 0.176 in |
Max. Head Height (H) |
N/A 0.052 in |
Min. Head Height (H) |
N/A 0.044 in |
Ref. Head Side Height (S) |
N/A 0.010 in |
Nom. Spline Socket Size (M) |
N/A 0.072 in |
Nom. Hexagon Socket Size (J) |
N/A 1/16 in |
Nom. Hexagon Socket Size Decimal (J) |
N/A 0.062 in |
Min. Key Engagement (T) |
N/A 0.035 in |
Max. Fillet Transition Diameter (F) |
N/A 0.119 in |
Min. Fillet Transition Diameter (F) |
N/A 0.109 in |
Nom. Maximum Standard Length (L) |
N/A 0.50 in |
