Email Us Today: 
Call Us Toll Free: 
General Note:
This product is designed and recommended for light fastening applications such as guards, hinges, etc. It is not suggested for use in critical high strength applications where socket head cap screws should normally be used.
Notes:
This product is designed and recommended for light fastening applications such as guards, hinges, etc. It is not suggested for use in critical high strength applications where socket head cap screws should normally be used.
Notes:
- Nominal Size. Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
- Head Height. Tabulated head heights represent metal-to-metal measurements
Unit of Measure
Specifications
Product |
N/A Socket Screws |
Unit of Measure |
N/A English |
Nominal Size or Basic Screw Diameter |
N/A No. 0 |
Nominal Size or Basic Screw Diameter (Decimal) |
N/A 0.0600 in |
Max. Head Diameter (A) |
N/A 0.114 in |
Min. Head Diameter (A) |
N/A 0.104 in |
Max. Head Height (H) |
N/A 0.032 in |
Min. Head Height (H) |
N/A 0.026 in |
Ref. Head Side Height (S) |
N/A 0.010 in |
Nom. Spline Socket Size (M) |
N/A 0.048 in |
Nom. Hexagon Socket Size Decimal (J) |
N/A 0.035 in |
Min. Key Engagement (T) |
N/A 0.020 in |
Max. Fillet Transition Diameter (F) |
N/A 0.080 in |
Min. Fillet Transition Diameter (F) |
N/A 0.070 in |
Nom. Maximum Standard Length (L) |
N/A 0.50 in |
